Connecting Additional Amplifiers; Plugging In - Pioneer Elite VSX-35TX Operating Instructions Manual

Connecting Additional Amplifiers

To hook up surround back speakers you need to use an additional amplifier. Other than for that purpose this
receiver has more than sufficient power for any home use, but it is possible to add additional amplifiers to
every channel of your system. Make the connections shown below to add amplifiers to power your speakers.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.

Plugging In

Up to two components can be powered from this receiver. Two of the outlets are switched, which means that
power is switched on and off with the receiver.
Before making or changing the connections, switch off the power and disconnect the power cord from the AC
wall outlet.
After connecting all your components, plug the receiver's power cord into a standard wall power outlet.
ANALOG
INPUT
L
ANALOG
INPUT
L
ANALOG
INPUT
ANALOG
INPUT
ANALOG
INPUT
L
You can use the additional amplifier on the surround back channels
memo
for a single speaker as well. In this case plug the amplifier into the L
(SINGLE) terminal only.
Connecting Your Equipment
R
Front channel amplifier
R
Surround channel amplifier
Center channel amplifier
(mono)
Powered sub woofer
Surround back channel
R
amplifier
Caution!
Power consumption of any equipment
connected to the switched power outlets
should not exceed 100W (0.8 A).
To avoid overheating, fire risk and possible
malfunction, do not connect high-wattage
appliances such as heaters, irons, monitors or
TV sets to this units AC outlets.
Disconnect the receiver from the power
outlet when it's not in regular use, for exam-
ple, when on vacation.
Caution!
Do not connect a monitor or TV to this unit's
AC OUTLETS.
21