Pioneer Elite VSX-35TX Operating Instructions Manual page 23

8 VIDEO SELECT button
Switches the receiver between the various
types of video input while keeping the audio
input the same.
9 TAPE 2 MONITOR button
Selects the tape deck (MD recorder, etc.)
connected to the TAPE 2 MONITOR inputs/
outputs. Allows monitoring of a recording as
it's being made.
10 TUNER CONTROL buttons (See p.54-57)
BAND – Press to select the AM or FM band.
CLASS – Press repeatedly to switch the preset
station classes.
TUNING SELECT – Switches the STATION/
TUNING button between station memory and
frequency select modes.
STATION –/+ – Selects station memories
when using the tuner.
TUNING –/+ – Selects the frequency when
using the tuner.
MPX – Press to switch between auto stereo
and MONO reception of FM broadcasts. When
the broadcast signal is weak, selecting MONO
will improve the sound quality.
MEMORY – Press to start the memorization of
a preset station.
11 Display (See p. 26)
12 Remote sensor
Point the remote control toward the remote
sensor to operate the receiver.
13 MULTI-JOG CONTROL buttons
SETUP – Press to switch the setup mode.
RETURN – Press to move back one step in the
SETUP process.
14 MULTI-ROOM & SOURCE button (See
p.80 – 84)
Press to use the multi room feature (it's best to
have an optional PIONEER Multi-Room Remote
Sensor Unit MR-100 or another IR receiver for
this feature).
CONTROL button (See p.80 – 84): Used
together with the INPUT SELECTOR to select
the function to select the volume of the MULTI
ROOM system.
15 MULTI JOG dial
You can use this dial for three purposes. In
normal mode turn it to select a source
component or press it to switch the display
between function mode and sound mode.
When you press the SETUP button (13), you
can use it to perform SETUP operations (turn to
select, push to enter).
Displays & Controls
The source indicators show the current
component:
DVD/LD – DVD player or LaserDisc player.
TV/SAT– TV or satellite tuner.
CD – Compact Disc player.
CD-R/TAPE1/MD – CD recorder, tape deck or
Mini Disc recorder connected to CD-R/TAPE 1/
MD inputs/outputs.
TUNER – The built-in tuner.
PHONO – Turntable.
VIDEO – Video camera (etc.) connected to the
VIDEO INPUT on the front panel.
VCR1/DVR – Video cassette recorder connect-
ed to VCR1/DVR inputs.
VCR 2 – Video cassette recorder or other
component connected to VCR 2 inputs.
16 MASTER VOLUME
Adjusts the overall receiver volume.
17 VIDEO INPUT jacks (See p.14)
DIGITAL IN: Optical video input for connecting
a video camera (or video game, portable DVD,
etc.), that has an optical out.
S-VIDEO : Video input for connecting a video
camera (etc.), that has an S-Video out.
VIDEO / AUDIO (L/R) : Video input for con-
necting a video camera, etc. that has standard
video/audio outputs.
18 LOUDNESS button (See p.49)
Switches the LOUDNESS mode on or off
(cannot be used in THX mode).
19 TONE button
This button has two functions. Firstly, it
switches between TONE on and TONE BY-
PASS, which bypasses the tone circuitry.
Secondly, you need to press the button before
using the CHANNEL SELECT buttons to adjust
the BASS & TREBLE (cannot be used in THX
mode).
CHANNEL SELECT button
Switches the tone adjust controls between the
FRONT, CENTER, SURROUND and SUR-
ROUND BACK speakers. You can then use the
BASS and TREBLE controls to adjust the
sound.
BASS (–/+) button (See p.50)
Use to adjust low frequencies.
TREBLE (–/+) button (See p.50)
Use to adjust the high frequencies.
20 PHONES jack
Connect headphones for private listening (no
sound will be heard through the speakers).
23