Pioneer Elite VSX-35TX Operating Instructions Manual page 83

Using the front panel with the MULTI-ROOM system
2,4,5
memo If you don't turn the multi room
function off you won't be able to turn
the entire main room system off.
memo
The A7 in this illustration/example
pertains to a station previously
programmed into the receiver's memory.
See p.56 for more details.
1 3,4,5
1 Press the MULTI-ROOM & SOURCE
button.
The display shown below will illuminate when the
receiver is in STANDBY mode.
2 Press the CONTROL button.
The light will start to blink.
3 Within ten seconds of step 2, select
the FUNCTION with the INPUT
SELECTOR.
For this example we'll use the TUNER function. The
display shown below will illuminate.
The INPUT SELECTOR steps through the functions in
the following order:
DVD/LD
TV/SAT
VCR 1 TUNER
4 Press the CONTROL button again
and use the INPUT SELECTOR to
adjust the VOLUME. The volume
can be adjusted in a range of –82dB
to 0dB.
If you slelcted FIXED in the SETUP MODE on the
previous page you won't be able to adjust the volume.
The display will appear as shown above.
5 When in TUNER function, press the
CONTROL button and use the
INPUT SELECTOR to tune in the
station.
The display will appear as shown below.
Turn the input selector until you get:
Using Other Functions
CD
CD-R/TAPE 1
«
83