Pioneer Elite VSX-35TX Operating Instructions Manual page 29

Fu n c t i on R e n ame
[
DVD / L D ]
DV D / L D
[ ]
VCR2 VCR2
VCR1 [ VCR1 R ]
/ DV
[ ]
V I DEO V I DEO
PHONO [ PHONO ]
CD - R [ CD - R ]
/ TA P E 1
[
CD CD ]
TV / SA T [ TV / SA T ]
[ ]
EX I T
RETURN SETUP
MULTI JOG
(Turn to select / Push to enter)
RETURN button:
Press to move back one step in the
SETUP process.
memo
After you complete one of the
System Setup menus and return to
the basic System Setup screen the
receiver automatically moves the
cursor to the next System Setup
menu. For example, if you've
completed Speaker Settings and
returned to the basic System Setup
screen, Channel Delay will be
selected automatically. You can
notice this on your TV screen.
REMOTE SETUP
INPUT
MENU
ATT
SYSTEM SETUP
4
+
EFFECT/
CH SEL
ENTER
(to exit
DIGITAL
–
SYSTEM NR
MULTI CH
SETUP) DSP
MIDNIGHT
INPUT
/DTS
THX
LIGHT ADVANCED
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
Next move on to the SURROUND SETUP menu and make all
the necessary settings. It is essential you make these settings
in order to get good surround sound .
The last set up menu, RENAME, lets you customize the
receiver to match your home system.
The sound set up modes explained here in a little more detail.
The order follows that of the SYSTEM SETUP menu.
ASSIGN SETUP:
Digital In Select (See p.30)
In order to use your digital components you must match the
numbered digital input settings with the numbered digital jacks
used by your digital components.
Multi Channel In (See p.31)
This is for hooking up a multi channel external decoder that
may give you higher quality when decoding discs. This feature
lets you select adjustable to non-adjustable sound.
Component-In Select (See p.32)
In order to use component video connections you must tell the
receiver which components are hooked to which terminals.
Multi Room (See p.81)
This receiver can power different systems set up in separate
rooms.
SURROUND SETUP:
Speaker Setting (See p.33 – 34)
Use to specify the type and number of speakers you connected.
Channel Delay (See p.35)
Adding a slight delay to some speakers enhances sound
separation and is particularly important for achieving a surround
sound effect. You need to figure out the distance from your
listening position to your speakers to add the proper delay.
Channel Level (See p.36 – 37)
Use to balance the volumes of your different speakers.
Crossover Network (See p.38)
This feature lets you select which bass frequencies will be sent
to the subwoofer or front speakers.
Bass Peak Level (See p.39)
Dolby Digital and DTS audio sources include ultra-low bass
tones. Set the bass peak level as needed to prevent the ultra-
low bass tones from distorting the sound from the speakers.
Dynamic Range Control (See p.40)
This feature makes possible excellent surround sound effects
when listening to Dolby Digital sources at low volumes.
RENAME (See p.69 – 70)
MUTE
This feature lets you rename specific "functions," which in this
FUNCTION
case stands for components like DVD/LD, VCR 1 , etc. This is a
4
useful feature for matching the remote control and receiver
SIGNAL
SELECT
display exactly with your home setup.
STEREO/
DIRECT
STANDARD
4 Press ENTER. Go on to the next page to
start the set up.
If you don't want to make any settings go can exit this setup.
To exit the System Setup menu and on-screen display press
SYSTEM SETUP button again.
Initial Setup
29