System Off - Pioneer Elite VSX-35TX Operating Instructions Manual

System Off

The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and turn off with
the push of only one button on the remote control. For example, you can program the unit to stop your DVD,
turn off your TV, turn off your DVD player and turn off the receiver itself. You don't need to program in other the
power for PIONEER components, they will go off automatically in this mode. The receiver itself will go off
automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight
possible components.
memo Be sure to recall or teach the remote control commands for each component before attempting
MULTI OPERATIONS (see "Setting Up the Remote Control to Control Other Components," p.
61).
Î
USE
S0URCE RECEIVER
MULTI
SYSTEM
OPERATION OFF
6-
2
VCR 1/
DVD/LD TV/SAT
DVR
MULTI CONTROL
CD-R/
CD TUNER TV CONT
TAPE 1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3
- + -
TUNING STATION
1 ¡ 4
-
DTV ON/OFF DTV MENU
CHANNEL
1 2 3
4 5 6
7 8 9
GUIDE
0
ENTER
+10
+ +
TV
TV VOL TV CONTROL VOLUME
– –
TV FUNC
REMOTE SETUP
2
INPUT
MENU
ATT
SYSTEM SETUP
+
EFFECT/ FUNCTION
CH SEL
ENTER
DIGITAL
–
NR
MULTI CH STEREO/
MIDNIGHT DSP
INPUT
/DTS
THX ADVANCED STANDARD
LIGHT
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 Set the remote control slide switch to
SETUP.
1
SETUP
Also make sure that your TV is on and set to the receiver.
3
VCR2
2 Press the REMOTE SETUP (INPUT ATT)
4
6- button and
1
8
+
the MULTI OPERATION SETUP mode.
¢
+
The REMOTE SETUP menu appears on your TV screen. The
MULTI CONTROL and the SYSTEM OFF buttons start to blink.
To cancel MULTI OPERATION SETUP mode, press REMOTE
SETUP.
EXIT
DISC 5
3 Press the SYSTEM OFF button.
The SYSTEM OFF button will blink.
4 Press the MULTI CONTROL button for the
MUTE
component whose operation you want to
start SYSTEM OFF with (for example, TV
SIGNAL
SELECT
CONT button).
DIRECT
The selected button will light steadily.
5 Press the operation, for example TV
(POWER), you want to input.
6 Repeat steps 3 and 4 to input SYSTEM OFF
for the components and commands you
want to input.
You can repeat this process for up to five
commands.
For example : you could enter the following two operations
using the proceeding steps 3 and 4.
1 Press TV CONT button & TV
(as explained above).
2 Press DVD/LD then
(if it is not a PIONEER product).
When you employ SYSTEM OFF (see below), these two tasks
will be performed in the same order.
• To exit SYSTEM OFF SETUP mode, press REMOTE SETUP
• When you're done setting up, remember to set the slide
switch back to USE.
Using Other Functions
at the same time to select
3
(POWER) to turn off your TV
(POWER) to turn off your DVD player
58–
75