Pioneer Elite VSX-35TX Operating Instructions Manual page 61

Î
USE
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
VCR 1/
DVD/LD TV/SAT VCR2
DVR
MULTI CONTROL
CD-R/
CD TUNER TV CONT
TAPE 1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- + - +
TUNING STATION
1 ¡ 4 ¢
-
+
DTV ON/OFF DTV MENU CHANNEL
1 2 3
4 5
6
5
7 8 9
GUIDE
0
ENTER
+10
+ +
TV
TV CONTROL VOLUME
TV VOL
– –
TV FUNC
REMOTE SETUP
INPUT
MENU MUTE
ATT
SYSTEM SETUP
+
EFFECT/ FUNCTION
CH SEL
ENTER
DIGITAL SIGNAL
–
SELECT
NR
MULTI CH STEREO/
DSP
MIDNIGHT
INPUT DIRECT
/DTS
THX ADVANCED
LIGHT STANDARD
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
memo
Only the buttons identified with five in
the illustration can be programmed.
5 Press the button to be programmed.
The MULTI CONTROL button lights steadily.
SETUP • The TV POWER, TV FUNC and TV VOL +/– buttons are only
available for learning when programming TV CONTROL
operations.
6 Point the remote controls at each other and
press the button on the other remote
control for the operation you wish to
program .
EXIT
DISC
1 Point the remote controls toward each other.
2 Hold down the button on the other remote control corre-
7
sponding to the operation you wish to program. Release
when the MULTI CONTROL button on the receiver's remote
control starts blinking.
(The MULTI CONTROL button blinks to indicate that the
operation has been learned.)
To program additional operations for the current
component, repeat steps 5 and 6.
To program operations for another component, repeat
steps 4 through 6.
7 Press the REMOTE SETUP button to exit the
learning setup mode.
The remote control and TV return to their previous operation
modes.
• When you're done setting up, remember to set the slide
switch back to USE.
• To erase programmed commands see p.78.
Remote Control of Other Components
2-5 inches
(5-12 cm)
61