Cleaning And Maintenance Drainage Method; Maintenance - HOMCOM 823-052V80 Manual

CLEANING AND MAINTENANCE
DRAINAGE METHOD
This appliance is equipped with an automatic water vaporisation system. The
condenser is cooled by the circulation of condensing water, which enhances
cooling efficiency and saves energy.
• If the internal vessel becomes full of water, the display screen will show 'FL' and
the compressor will automatically stop working. T o resolve this, turn off the unit,
unscrew the water cover and pull out the water wedge to drain the water. After
restarting the unit, it will return to normal operation.

MAINTENANCE

Note: To avoid an electric shock, turn off and unplug
the appliance before maintenance and repairs.
CLEANING
• Unplug the appliance before cleaning.
Wipe with a soft and damp cloth. Do not use benzene,
alcohol, gasoline or other chemicals, as this could damage
the appliance.
• Keep water out of this appliance.
FILTER SCREEN
• Wash the filter screen once every two weeks. Dust accumulation can reduce the
efficiency of the appliance.
• Remove the air inlet grille and pull out the filter screens on both sides, as shown in
the provided figures.
• Place the filter screens in warm water (around 40°C) with a natural detergent.
After cleaning, dry them in a shaded area.
SEASONAL CLEANING
If the appliance is not used for long periods:
• Pull out the water wedge to drain.
• Run the appliance in fan mode for two hours until it is dry inside.
• Turn off and unplug the appliance.
• Wash the filter screen and reassemble it.
• Dismantle the exhaust duct and keep it safe.
• Cover the appliance with a plastic cover and store it in a dry location.
9