Botex DPX-1210T NET User Manual page 21

Setting a scene manually
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the 'SCENE REC' submenu is shown on the display.
3.
Press to select the 'Copy' submenu and confirm with [ENTER].
4.
Press or repeatedly until the display shows the number under which you want to
save the scene (display shows '01' ... '99' ).
Scenes 71...99 are preset sample scenes. You can modify or overwrite them.
5.
Press to move the cursor to 'ENTER' .
ð The 'ENTER' display flashes.
6. Press [ENTER].
ð The incoming DMX signal is saved as a scene under the set number. At the end of
the saving process, the scene numbering display automatically jumps to the next
higher number.
Scenes can be created and saved manually using the 'SCENE REC/Assign' menu.
1. Press [MENU] to activate the main menu.
2.
Press or repeatedly until the 'SCENE REC' submenu is shown on the display.
3.
Press to select the 'Assign' submenu and confirm with [ENTER].
4.
Press to move the cursor to the number of the channel whose value you want to
change.
Operating
DPX-1210T NET
21
Dimmer Pack