Botex DPX-1210T NET User Manual page 18

Operating
Setting the Art-Net address
DPX-1210T NET
18
Dimmer Pack
ð The value is confirmed. The parent menu level is displayed.
6.
Press to select the 'Patch:' submenu for channel selection.
7.
Press [ENTER] to activate the Cursor.
8.
to move the cursor between the fields ' Patch:' for channel selection and
Press
'Start:' for entering the start address.
9.
Press or repeatedly until the display shows the desired channel (display shows '01'
... '12' ) or the desired start address (display shows '001' ... '512' ) and confirm with
[ENTER].
ð The DMX start address is assigned to the selected channel.
The ArtNET address is set via the 'ADDRESS' menu.
1.
Press [MENU] to activate the main menu.
2.
Press or repeatedly until the 'ADDRESS' submenu is shown on the display.
3.
Press to select the 'ArtNET' submenu and confirm with [ENTER].
4.
Press to select the 'SubNET:' submenu for a subnet or the 'Universe' submenu for an
ArtNET universe and confirm with [ENTER].
5.
Press or repeatedly until the display shows the desired address for the subnet or the
Art-Net universe (display shows '000' ... '255' ) and confirm with [ENTER].
ð The ArtNET address is assigned to the selected SubNET or ArtNET universe.