Installation And Starting Up - Botex DPX-1210T NET User Manual

Installation and starting up

4 Installation and starting up
Connector
DPX-1210T NET
10
Dimmer Pack
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
The device is designed for mounting in 19" racks, it occupies two rack units (RU).
First, connect the loads to the terminals on the back of the device. Establish the DMX link to
the controller. Connect the mains connection terminals with a mains cable. Finally, connect the
power plug of the device to a 32 A CEE socket.
Connection options for blocks L1, L2 and L3:
one block per phase
n
one block to one phase, two blocks to a second phases
n
n all blocks to one phase