Addendum - Boss Linked Tower with Bridge Platform Instruction Manual

4

Addendum

Werner UK Sales and Distribution Ltd. believes that some of the
following may cause confusion or misunderstanding. This should
be considered before acting on this information.
Mandatory wording, required to gain certification to BS 1139-6:2022.
This information shall be available at the location of use of the prefabricated tower
scaffold.
This prefabricated tower scaffold shall only be used according to this information.
When working outdoors, the weather forecast shall be taken into account before
assembly, use and dismantling.
Platforms shall be installed with vertical distances between them not exceeding 2.1m
when assembling and dismantling.
Alterations to the prefabricated tower are only permitted where they are shown in
these instructions.
User training courses cannot be a substitute for instruction manuals and assembly,
use and dismantling plans but can only complement them.
Only the components specified in this information shall be used.
Damaged or incorrect components shall not be used.
Prefabricated tower scaffolds designed in accordance with this standard are not
anchor points for personal fall arrest equipment.
Working is only permitted on a platform with a complete side protection including
guardrails and toeboards.
In the event that an alteration to the prefabricated tower scaffold design is required,
approval from the supplier and/or designer shall be obtained and a revised instruction
manual or assembly, user and dismantling plan created.
After assembly or alteration, the following minimum information should be displayed
on the prefabricated tower scaffold and be clearly visible from the ground (e.g. on a
tag).
a) The name and contact details of the responsible person.
b) If the tower is ready for application or not.
c) The load class and uniformly distributed load.
d) If the if prefabricated scaffold is intended for internal use only.
28
BoSS Linked Tower Instruction Manual