Stabilisers - Boss Linked Tower with Bridge Platform Instruction Manual

2 Building the Tower
2.4

Stabilisers

Stabilisers should always be fitted when specified. See quantity schedule on pages 8
to 11. Stabilisers must always be fully extended.
Attach one stabiliser to each corner of the tower as shown.
Position the lower clamp so that the lower arm is as close to horizontal as possible.
Adjust the position of the upper clamp to ensure the stabiliser foot is in contact with
the ground. Ensure clamps are secure.
Temporary Stabiliser
Pattern During Assembly
X
bossaccesstowers.com
X
90˚
90˚
Y
Before Use
Description Y (mm)
SP7 1227
SP10 2241
13