Advertisement

PRELIMINARY WARNINGS
The word WARNING preceded by the symbol
The word ATTENTION preceded by the symbol
connected equipment. The warranty shall become null and void in the event of improper use or tampering with the module
or devices supplied by the manufacturer as necessary for its correct operation, and if the instructions contained in this
manual are not followed.
WARNING: Before operating, read this document thoroughly and retain it for future reference. Non-respect of these
instructions may reduce performances and safety of the devices and cause danger for people and property. The
products must be installed, operated, serviced and maintained by qualified personnel in compliance with applicable
standards and regulations. Don't open the device, it does not contain replaceable components, the tripping of the
internal fuse (if included) is caused by an internal failure. Don't repair or modify the device, if malfunction or failure
should occur during operation, send unit to the factory for inspection. No responsibility is assumed by SENECA for
any consequences deriving from the use of this material.
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to
electrostatic discharges. Take appropriate measures during any operation.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized
to recycle electrical and electronic waste.
SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287
CONTACT INFORMATION
Technical support
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
MI00623-0-EN
INSTALLATION MANUAL
Z111
indicates conditions or actions that put the user's safety at risk.
indicates conditions or actions that might damage the instrument or the
DOCUMENTATION
support@seneca.it
INSTALLATION MANUAL
Z111
Product information
sales@seneca.it
1/5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z111 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Seneca Z111

  • Page 1 (if included) is caused by an internal failure. Don’t repair or modify the device, if malfunction or failure should occur during operation, send unit to the factory for inspection. No responsibility is assumed by SENECA for any consequences deriving from the use of this material.
  • Page 2: Module Layout

    MODULE LAYOUT 17.5 mm SELECTORS Dimensions: 17.5 x 102.5 x 111 mm Weight: 100 g Container: PA6, black SIGNALS VIA LED ON FRONT PANEL STATUS LED meaning The device is powered correctly FAIL Instrument in error state Closed Input INPUT Open Input TECHNICAL SPECIFICATIONS CERTIFICATIONS...
  • Page 3: Installation Regulations

    INSTALLATION REGULATIONS The module has been designed for vertical installation on a DIN 46277 rail. For optimal operation and long life, adequate ventilation must be provided. Avoid positioning ducting or other objects that obstruct the ventilation slots. Avoid mounting modules over heat-generating equipment. Installation in the bottom part of the electrical panel is recommended.
  • Page 4 Z111 module.
  • Page 5: Electrical Connections

    ELECTRICAL CONNECTIONS CAUTION To meet the electromagnetic immunity requirements: - use shielded signal cables; - connect the shield to a preferential instrumentation earth system; - separate shielded cables from other cables used for power installations (transformers, inverters, motors, etc...). CAUTION Use AWG size 30-12 or two 24-16, torque 5 lb in.

Table of Contents