Seneca Z109UI2 User Manual
  1. Manuals
  2. Brands
  3. Seneca Manuals
  4. Media Converter
  5. Z109UI2
  6. User manual

Seneca Z109UI2 User Manual

V - ma converter module with galvanic insulation
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
EN
Chapter index
This document is property of SENECA srl. Duplication and reproduction of it are forbidden (though partial), if not authorized.
Contents of present documentation refers to products and technologies described in it. Though we strive for reach perfection
continually, all technical data contained in this document may be modified or added due to technical and commercial needs.
It's impossible eliminate mismatches and discordances completely. Contents of present documentation is anyhow subjected to
periodical revision. If you have any questions don't hesitate to contact our structure or to write us to e-mail addresses as above
mentioned.
Z109UI2
SENECA s.r.l.
Via Austria, 26 - 35127 - PADOVA - ITALY
Tel. +39.049.8705355 - 8705359 Fax. +39.049.8706287
Internet site:
www.seneca.it
Commercial reference:
-1
with galvanic insulation
Page
2
2
2
4
4
6
8
8
8
Technical assistance:
sales@seneca.it
MI004301-E
V - mA
converter module
support@seneca.it
ENGLISH 1/8
Z Line

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z109UI2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Seneca Z109UI2

Summary of Contents for Seneca Z109UI2

  • Page 1: Table Of Contents

    Commercial reference: sales@seneca.it This document is property of SENECA srl. Duplication and reproduction of it are forbidden (though partial), if not authorized. Contents of present documentation refers to products and technologies described in it. Though we strive for reach perfection continually, all technical data contained in this document may be modified or added due to technical and commercial needs.

  • Page 2: Preliminary Warnings

    2. DESCRIPTION AND CHARACTERISTICS 2.1 MODULE DESCRIPTION The Z109UI2 module acquires an voltage or current input signal, converts it to an analog format and send it to an universal isolated output. 2.2 GENERAL CHARACTERISTICS AND FEATURES Voltage or current input type: V or mA.

  • Page 3: Connections

    INSULATIONS 1500V STANDARDS The module complies with the following standards: EN61000-6-4 (electromagnetic emission, in industrial environment) EN61000-6-2 (electromagnetic immunity, ANALOG V - mA in industrial environment) INPUT EN61010-1 (safety) Notes: POWERSUPPLY - Use with copper conductor. - Use in Pollution Degree 2 Environment 1500 V...

  • Page 4: Preliminary Instructions For Use

    Avoid placing signal cables near power cables and power appliances (inverters, motors,  induction ovens etc...). 5.2 USB INTERFACE The module has a microUSB connector, you can configure it through APP and/or software. For more information please see www.seneca.it/products/z109ui2 Z109UI2 CU-A-MICROB CU-A-MICROB CU-A-MICRO-OTG 5.3 CONNECTIONS Please provide the module with supply voltage < 40 V...

  • Page 5: Voltage Or Current Input

    VOLTAGE OR CURRENT INPUT VOLTAGE VOLTAGE CURRENT INPUT INPUT: mV INPUT: V 7(+) 11(+) 11(-) 10(-) Passive module Active module V input > 150 mV V input < 150mV The sensor power The module power the loop (mA) the loop (mA) mA input mA input (2 wires) 5.6 ANALOG OUTPUT...

  • Page 6: Configuration

    6. CONFIGURATION INPUT SELECTION / MEASURING SCALE You can select the type of input by setting SW1 DIP switches placed on the side of the module. Every type of input is matched to a certain number of beginning and end scale values which can be selected through SW2 DIP switches.

  • Page 7: Start And End Setting At Will

    START AND END SETTING AT WILL The START and END push-buttons under the SW2 DIP-switch group allow to set the beginning and end scale at will, within the scale pre-set through the dip-switches. To obtain this facility it is necessary to use a suitable signal generator, able to furnish the desidered values of beginning and end scale.

  • Page 8: Jumpers Position

    FAIL PWR/ FAIL Z109TC2-1 Z109UI2-1 9. DECOMMISSIONING AND DISPOSAL Disposal of Electrical & Electronic Equipment (Applicable throughout the European Union and other European countries with separate collections programs). This symbol, found on your product or on its packaging, indicates that this product should not be treated as household waste when you wish to dispose of it.

This manual is also suitable for:

Z109ui2-1

Table of Contents