Location; Included - Sharp CV-P10RC Installation And Operation Manual

LOCATION

• The air conditioner should be placed on a fi rm founda-
tion to minimize noise and vibration. For safe and se-
cure positioning, place the unit on a smooth, level fl oor
strong enough to support the unit.
• The unit has casters to aid placement, but it should
only be rolled on smooth, fl at surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to roll
the unit over objects.
• The unit must be placed within reach of a properly
rated grounded socket.
• Never place any obstacles around the air inlet or outlet
of the unit.
• Allow at least 12" (30cm) of space from the wall for ef-
fi cient air-conditioning.

INCLUDED

SUGGESTED TOOLS FOR WINDOW PANEL INSTALLATION
1. Screwdriver(medium size Phillips)
4. Saw (In the event that the window panel needs to be cut down in size because the
window is too narrow for direct installation.)
MIN.12"
(30cm)
2. Tape measure or ruler 3. Knife or scissors
E-7
MIN.12"
(30cm)