Page 1
Quick Start Guide LUKA GNSS Receiver LUKA as a Base LUKA as a Rover Version 2.0...
Page 2
The installation of the 410-470MHz radio whip antenna refers to Figure 1.2 LUKA as a Base – Internal Radio and Figure 1.5 LUKA as a Rover – Internal Radio. The installation of the high gain radio antenna refers to Figure 1.3 LUKA as a Base –...
LUKA Quick Start Guide – System Setup 1.System Setup LUKA GNSS Receiver can work as a Base or a Rover. ● LUKA as a Base ● LUKA as a Rover According to the customer requirements, set up the system as per...
LUKA Quick Start Guide – System Setup 1.1 Base Setup Figure 1.1 LUKA as a Base – Network Mode Table 1.1 Devices in Figure 1.1 Device Name LUKA GNSS Receiver Height measure accessory GNSS antenna connector Tribrach Tripod...
Page 5
LUKA Quick Start Guide – System Setup Figure 1.2 LUKA as a Base – Internal Radio Table 1.2 Devices in Figure 1.2 Device Name LUKA GNSS Receiver Height measure accessory 410-470MHz radio whip antenna Extension pole 30cm Tribrach Tripod...
Page 6
LUKA Quick Start Guide – System Setup Figure 1.3 LUKA as a Base – External Radio RS400H3 Table 1.3 Devices in Figure 1.3 Device Name LUKA GNSS Receiver Height measure accessory 410-470MHz radio whip antenna Type-C to Ext-Radio-DC-5pin & Bullet-DC...
LUKA Quick Start Guide – System Setup 1.2 Rover Setup Figure 1.4 LUKA as a Rover – Network Mode Table 1.4 Devices in Figure 1.4 Device Name LUKA GNSS Receiver Bracket for TC80 Ranging pole TC80 Controller...
Page 8
LUKA Quick Start Guide – System Setup Figure 1.5 LUKA as a Rover – Internal Radio Table 1.5 Devices in Figure 1.5 Device Name LUKA GNSS Receiver 410-470MHz radio whip antenna Bracket for TC80 Ranging pole TC80 Controller...
LUKA Quick Start Guide – Configure via Nuwa App 2.Configure via Nuwa App 2.1 NFC Function While LUKA is powered on and the screen of TC80 Controller is unlocked, put TC80 Controller close to the LUKA NFC logo. The Bluetooth pairs automatically after a beep and Nuwa is launched requesting to open the latest project.
Page 10
LUKA Quick Start Guide – Configure via Nuwa App 2.2 Create project / open existing project If using an android device without NFC function, ensure LUKA is powered on, and launch Nuwa application on the android device. Click [Project] in the main interface to create a new project or open an existing project as shown in Figure 2.1 and...
Page 11
LUKA Quick Start Guide – Configure via Nuwa App 2.4 Configure Base or Rover Back to the Device interface, click [Base] to enter the Work Mode List, create a new Base or edit an existing base as shown in Figure 2.3; Select [Rover] to enter the Work Mode list, create a new Rover or edit an existing rover as shown in Figure 2.4;...
This Quick Start Guide briefly introduces the setup and operation for LUKA GNSS Receiver and the operation of Nuwa app. More details please refer to User Manual of LUKA and User Manual of Nuwa app which can be downloaded from Tersus official website: https://www.tersus-gnss.com/product/LUKA-gnss-receiver.
Need help?
Do you have a question about the LUKA and is the answer not in the manual?
Questions and answers