Belden DCX XCONNECT Quick Start Manual

DCX XCONNECT PATCH CORD TELESCOPIC SPOOL
QUICK START GUIDE
PX106862 - EN REV B
Telescopic Spool Application
Prior to opening an Housing Tray, the Telescopic Spool can be extended to procure the necessary patch cord Slack for the Tray movement.
The Telescopic Spool is extended by pushing the Spool Button and pulling the External Slider forward.
Housing Tray on Patch position
Telescopic Spool Kit Installation
Before proceeding with the installation of the Telescopic Spool Kit, make sure to install (or determine the position of) the DCX Housings that
will be used into the Cabinet. The Housing's positions will determine the location where to place and secure the Telescopic Spools.
1
. Determine the cable flow direction of the Cabinet.
For a left-to-right (LR) Cabinet, the Spool Kit will be installed at right.
For a right-to-left (RL) Cabinet, the Spool Kit will be installed at left.
LR cabinet
External Slider
Spool button
Spool Kit installation area
RL cabinet
Page 1 of 4