Advertisement
Quick Links
ECX SPLICE CASSETTE
INSTALLATION GUIDE
ES: Visite nuestra pagina web www.belden.com para obtener el guía de instalación en español.
FR: Veuillez visiter notre site web au www.belden.com pour obtenir le guide d'installation en français.
Carton contents
1. Housing (1X)
2. Cover (1X)
3. Universal splice holder (optional)
4. Cable tie (not shown)
STANDARD RECOMMENDED PROCEDURE
1
PX106485-EN REV A
2
3
Page 1 of 8
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Belden FX ECX Cassette OM4 12P Splice
Summary of Contents for Belden FX ECX Cassette OM4 12P Splice
- Page 1 ECX SPLICE CASSETTE INSTALLATION GUIDE ES: Visite nuestra pagina web www.belden.com para obtener el guía de instalación en español. FR: Veuillez visiter notre site web au www.belden.com pour obtenir le guide d’installation en français. Carton contents 1. Housing (1X) 2. Cover (1X) 3.
- Page 2 Routing fiber splice cassette The following instructions describe fiber routing and splicing inside the splice cassette. Please take note that the splice cassette is adapted for splicing and managing 900μm (tight buffer) and 250μm optical fiber. Cable preparation: Leave 53in approx. of sub-unit and another 34in approx. of 900μm. Pigtail preparation: Leave 63in approx.
- Page 3 Secure the end of the sub-unit with the provided cable tie. Loop the fiber twice (2) as shown. Make sure fiber is well positioned under routing tabs. STANDARD RECOMMENDED PROCEDURE PX106485-EN REV A Page 3 of 8...
- Page 4 Reinstall and close the cover. Flip the cassette. Route the sub-unit cable under the routing tabs as shown. Secure it with the provided cable tie. STANDARD RECOMMENDED PROCEDURE PX106485-EN REV A Page 4 of 8...
- Page 5 Flip the cassette. Open the cover. Mate connectors to adapters. Route the pigtails as shown by looping twice (2) in the cover. In order to prepare for splicing, unloop 900µm fiber from cassette. STANDARD RECOMMENDED PROCEDURE PX106485-EN REV A Page 5 of 8...
- Page 6 Splice the 900 µm fiber (tight buffer) to the pigtails. STANDARD RECOMMENDED PROCEDURE PX106485-EN REV A Page 6 of 8...
- Page 7 Route the pigtails by doing another loop in the cover. Route the 900µm fiber (tight buffer) by doing another loop in the housing as shown. Insert the spliced fiber into the universal splice holder by doing an inverted “s” loop. STANDARD RECOMMENDED PROCEDURE PX106485-EN REV A Page 7 of 8...
- Page 8 Manage the rest of the fiber as shown. Store it under the routing tabs. STANDARD RECOMMENDED PROCEDURE PX106485-EN REV A Page 8 of 8...
Need help?
Do you have a question about the FX ECX Cassette OM4 12P Splice and is the answer not in the manual?
Questions and answers