ICON PRO-FORM 410 TRAINER User Manual page 12

CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features
designed to make your workouts more effective and
enjoyable. When you select the manual mode of the
console, you can change the speed and incline of the
treadmill with the touch of a button. As you exercise,
the console will display continuous exercise feedback.
You can even measure your heart rate using the built-
in handgrip pulse sensor.
The console also features two iFit weight loss workouts
that control the speed and incline of the treadmill to
help you burn unwanted pounds.
In addition, the console offers four preset iFit speed &
incline workouts. Each workout automatically controls
the speed and incline of the treadmill as it guides you
through an effective workout.
Key
To turn on the power, see page 13.To use the manual
mode, see page 13. To use a weight loss workout or
a speed & incline workout, see page 15. To use the
information mode, see page 16.
IMPORTANT: If there is a sheet of clear plastic on
the face of the console, remove the plastic. To pre-
vent damage to the walking platform, wear clean
athletic shoes while using the treadmill. The first
time the treadmill is used, observe the alignment of
the walking belt, and center the walking belt if nec-
essary (see page 21).
Note: The console can display speed and distance in
either miles or kilometers. To find which unit of mea-
surement is selected, see THE INFORMATION MODE
on page 16. For simplicity, all instructions in this man-
ual refer to miles.
12
Clip