Table of Contents
Advertisement
Installation -
Disassemble the camera
For the installation, detach the camera from the junction box and gang box bracket. Using the wrench included with the
camera, loosen the three (3) screws connecting the camera module to the junction box and the three (3) screws connecting
the junction box to the gang box bracket.
Using the mounting template sheet or the camera's gang box bracket itself, mark and drill the necessary holes in the mounting
surface.
Resetting the camera: With the camera ON, press the reset button above
the SD card slot for five (5) seconds to initiate a camera-wide reset of all
the settings, including network settings.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the MEGApix Ai DWC-XSBJ08Mi and is the answer not in the manual?