Digital Watchdog MEGApix Ai DWC-XSBJ08Mi User Manual page 10

4k bullet ip camera

Table of Contents

Installation -

Typical Installation - Continued

2. Assemble the bottom junction box and gang box bracket. Align the markings on the camera and junction

box when assembling the camera.

3. Connect the camera to the junction box using the safety wire.

4. Adjust the camera's tilt and angle by loosening the tilt screw at the base of the camera's arm. Tighten the

screw once the adjustment is complete.

NOTE:

When setting up the camera for the first time, use the CALIBRATE button on the camera's web GUI to auto

calibrate the camera's lens before operation.

5. Remove the protective film from the lens cover. Gently wipe the cover with lens tissue or a microfiber cloth

to remove any dust or smudges left from the installation process.

Mounting

Template

Gang Box

Bracket

Safety Wires

Table of Contents

Need help?

Do you have a question about the MEGApix Ai DWC-XSBJ08Mi and is the answer not in the manual?