Abbott Endurity Core User Manual page 36

After the device has been implanted and the pocket is closed, interrogate the device and set the Lead Type to
the correct setting. Lead Type settings are described on the programmer's on‑screen help. For MR Conditional
pulse generators, set the Additional Hardware parameter to the correct setting.
NOTE:
▪ In CRT‑Ps, the right and left ventricular pulse amplitudes and pulse widths are independently ▪
programmable. The pulse amplitude and pulse width should be evaluated in each chamber accordingly.
▪ In CRT‑Ps, independent lead impedance values are displayed for the RV and LV leads. ▪
Managing and Following Patients
Patient Registration Form
Fill out and return the Patient Registration Form to register the patient and facilitate patient tracking.
Patient Identification Card
Fill out the Patient Identification Card as provided in the outer box with the patient's name, implant date, and
your name or healthcare facility information along with the contact phone number. Record device information
(model number, serial number, and UDI number) and leads information (model number, serial number, and
UDI number), or apply the labels provided with the sterile package in the designated sections of the card. Fill
out the location of the device in the corresponding implant location field on the Patient Identification Card.
Fill out the model/length and implant location of the leads in the corresponding fields on the Patient
Identification Card.
Patient Follow‑Up
Give the completed card to the patient. To obtain a replacement card if a patient loses or damages their card,
contact Abbott Medical Technical Support (page 38).
34