Related Manuals for WamBam SLIM JIM AG14002
Summary of Contents for WamBam SLIM JIM AG14002
- Page 1 AG14002 ASSEMBLY INSTRUCTIONS SLIM JIM ASSEMBLY INSTRUCTIONS ALUMINUM GATE AG14002 60 MIN WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM VER. 031721...
- Page 2 AG14002 ASSEMBLY INSTRUCTIONS GENERAL IMPORTANT INFORMATION Check the inside of the larger pieces in your box for other materials packed inside. When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching. We recommend an area approximately 5’x 8’ for unobstructed assembling.
- Page 3 AG14002 ASSEMBLY INSTRUCTIONS INFORMATION GENERAL understand your fence. 1. That you have everything necessary to complete the gate. 2. That you will have assembled the gate frame in the correct order. 4. The gate height and width are similar to the measurements shown on page four. your gate correctly, please disassemble as necessary, and use the included self-drilling stainless steel screws to permanently assemble the gate.
- Page 4 DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS This gate can be trimmed down both in width and 50in. 48in. 3.94in. 52in. 48in. 36in. 2in. Ground Gate Jig Metal Post Stabilizer String Line 3in. Ground 52in. WamBam 42in. Ornamental Anchor Center to Center WWW.WAMBAMFENCE.COM...
- Page 5 AG14002 ASSEMBLY INSTRUCTIONS LAY OUT MATERIALS STEP 1: Aluminum Gate Hinge (2) Gate Jig (1) Metal Post Nut and Bolt (8) Gate End Picket (7) (32) Stainless Steel 1” x 1” x 45” 1” x 1” x 45” (14) WWW.WAMBAMFENCE.COM...
- Page 6 AG14002 ASSEMBLY INSTRUCTIONS GATE JIG, POST ANCHORS, AND POSTS STEP 2: STEP 2.1 STEP 2.2 60” long x 6” wide x ½” deep. Stabilizer and pound it into the ground. into the metal post stabilizer and determine Note: Metal post ½”...
- Page 7 AG14002 ASSEMBLY INSTRUCTIONS STEP 2.7 Make sure to fasten the fence panels PICKETS STEP 3: STEP 3.1 STEP 3.2 Insert the Pickets Self-Drilling Steel Screws and align the holes in the pickets with release at the point when the with the rail. If you force the screw, you will strip it.
- Page 8 AG14002 ASSEMBLY INSTRUCTIONS ASSEMBLING THE GATE STEP 4: STEP 4.1 STEP 4.2 Orient the Gate End Assembly so it Insert the rails faces up to receive the assembled panel. Both rails must be inserted simultaneously to for the bolt to be prevent binding.
- Page 9 AG14002 ASSEMBLY INSTRUCTIONS HINGES AND LATCH FINGER STEP 5: STEP 5.1 STEP 5.2 to the gate post to the gate post Screws THE GATE TO THE FENCE PANEL STEP 6: STEP 6.1 Use temporary spacers or blocks to rest the gate on during self-drilling hex head screws.
- Page 10 AG14002 ASSEMBLY INSTRUCTIONS STEP 6.2 screws into the pre-drilled holes on the inside of the hinges. Align and fasten the Latch Catch WWW.WAMBAMFENCE.COM...
- Page 11 AG14002 ASSEMBLY INSTRUCTIONS OVER A ALTERNATIVE APPLICATION: SIDEWALK OR PATH STEP 1.1 If the sidewalk is less than 52”, use the gate jig as a temporary spacer. Proceed installing the panels according to the fence’s install guide. Sidewalk/path OVER A ALTERNATIVE APPLICATION: SIDEWALK OR PATH STEP 1.1...
- Page 12 AG14002 ASSEMBLY INSTRUCTIONS 6935 Reames Rd. Ste. K. hmmm@wambamfence.com 704-892-5222 877-778-5733 WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM...
Need help?
Do you have a question about the SLIM JIM AG14002 and is the answer not in the manual?
Questions and answers