WE-EF SLS410 LED Nstallation And Maintenance Instructions

Wall luminaires surface mounted

Download this manual

Do not open during installation

This product is factory-sealed.

Refer to the instructions contained in this

document for details.

Surge Protection

This product features built-in surge protection circuitry in compliance

with applicable standards.

For comprehensive protection of a luminaire installation against lightning

and electrical surges, it is essential to cover mains supply and data input

lines at the distribution board level, by using respective primary (Type 1)

and secondary (Type 2) surge arrestors in compliance with EN61643-11/

IEC61643-1.

Warning

Ensure that all required surge protection measures are in place and

activated prior to luminaire installation. Also, disconnect luminaires

before operating high-power devices such as, for example, electrical

arc welders.

WE-EF LEUCHTEN

Installation and Maintenance

Instructions

Wall Luminaires Surface Mounted

SLS410 LED

SLS420 LED

Need help?

Do you have a question about the SLS410 LED and is the answer not in the manual?

Page 1 WE-EF LEUCHTEN Installation and Maintenance Instructions Wall Luminaires Surface Mounted SLS410 LED SLS420 LED Do not open during installation Surge Protection This product is factory-sealed. This product features built-in surge protection circuitry in compliance Refer to the instructions contained in this with applicable standards.
Page 2 Wall Luminaires Surface Mounted SLS410 SLS420 ø 6 ø 6...
Page 3: Maintenance
Light Source Maintenance Apart from cleaning the product’s exterior surfaces, no special maintenance work is required. Do not use high-pressure cleaners. In case of component failure due to abnormal circumstances or at end of life, replacement must be carried Warning: Do not open luminaire while mains supply is switched on.
Page 4: Installation Procedure
Installation Installation Procedure The product must be installed and maintained A from cover B by loosening with latest building/construction and/or electrical screws C. regulations and relevant legislation. 3) Check that rating shown on luminaire label conforms with mains electrical supply. Warning: installing and connecting the luminaire.
Page 5 Individual connection Through wiring...
Page 6 WE-EF SWITZERLAND WE-EF LIGHTING Switzerland United States of America Tel +41 22 752 49 94 Tel +1 724 742 0030 Fax +41 22 752 49 74 Fax +1 724 742 0035 info.switzerland@we-ef.com info.usa@we-ef.com TO9051W0823 © WE-EF 2023 subject to change.

Sls420 led