NIIMBOT B1 - Smart Label Printer Manual

Package Contents

Installation

1. Press the Open Slide on the left to open the paper compartment.
   
2. Push the paper compartment baffle to the sides and fit the label paper into the paper compartment with the print side facing down.
   
   
   Beware of shape blade when the paper compartment is open.
3. Slide the paper compartment baffle inwards to secure the label paper, pull the first paper out, make sure it sticks out of the paper exit.
   
4. Close the paper compartment and long-press the Power Button to turn the printer on.
   

Installing App

Download App

Before using the printer, please install the NIIMBOT app from Google Play or the App Store.
NIIMBOT
Design & Print APP easy to download and use

• More information available on the NIIMBOT app.
  Sign in to NIIMBOT → Me → Help Center → Hardware

Download Desktop Version

You can download and install "NIIMBOT" Desktop version from our official website (www.niimbot.com).

Connecting and Printing

1. Open NIIMBOT app and turn on Bluetooth on your phone.
   
2. On Home, tap Connect smart label printer. Then select device model.
   • Notice: If a PIN code is required, input 0000 or 1234.
3. After connecting, tap on "Current label template" on the Home tab to enter the label editor.

Special Notes
Images of products, accessories, and the app in this manual are for illustrative purposes only and may be different from actual products. Products are subject to change without prior notice.

Basic Functions

LED Indicators

Specifications

Safety Precautions

Please read all the instructions and warnings in this manual carefully before using this product to ensure the proper functioning of the device and your safety.

Don't disassemble the product without authorization. Disassembled products cannot be returned or exchanged.

Do not wipe the product with corrosive chemicals or cleaning agents.

Do not use the product near places with flammable products such as gas stations or fuel depots.

1. Please keep the product and accessories out of the reach of children or they must be used under the supervision and guidance of a guardian;
2. Turn off the power immediately when water gets into the product;
3. Turn off the power immediately in case of any product malfunction;
4. If you want to use a power adapter, always use one that is safe, regulatory-compliant, and compatible;
5. Do not disassemble the product to replace the battery. Improper operation may cause an explosion;
6. The battery contains special protection circuit and device, please do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help;
7. Do not expose the product and the power adapter to high temperature or high humidity. Do not put them in water, otherwise a short circuit may occur and the battery may heat up, smoke, deform, damage, or even explode;
8. If smoke or smell comes from the product or the power adapter, please unplug the power adapter immediately and avoid any burns.

1. Please use NIIMBOT label paper to prevent print quality issues or printhead damage;
2. Please stop using the product immediately when the battery cannot provide enough power;
3. The product comes with a built-in rechargeable battery. Do not throw it into fire or heat it. Do not charge, use or store it in a hot place, as this may cause overheating, fire or explosion.