Installation Open Clasp Lift the open clasp upward to open the compartment. This side faces up. Please choose B18-compatible thermal printing label paper for printing. Fit the label paper inside with the label side facing up.
Page 4
03 · 04 Paper Duct Tear-off Slot Thread the paper roll through the paper duct and make sure the first label paper sticks out of the tear-off slot. This side faces down. Thermal Transfer Ribbon Label Tauten the thermal transfer ribbon counterclockwise according to the thermal transfer ribbon label and fit it into the compartment with the label side facing down.
05 · 06 Installing App Before using the printer, please install the NIIMBOT app from Google Play or the App Store. NIIMBOT Design & Print APP easy to download and use More information available on the NIIMBOT app. Sign in to NIIMBOT...
Connecting and Printing Open NIIMBOT app and turn on Bluetooth on your phone. 8:30 Turn on Bluetooth NIIMBOT On Home, tap Connect smart label printer. Then select device model. Notice: If a PIN code is required, input 0000 or 1234.
07 · 08 Basic Functions Function Operation Switch on Hold down the Power button for three seconds. Hold down the Power button for three seconds when Switch off the device is on. Print history Press the Power button once when the device is on. Print a test page Double-press the Power button when the device is on.
LED Indicators Indicator Status Description Blue Blinking slowly Standby Blue Blinking fast Charging Blue Solid Bluetooth connected Blinking slowly Battery low, standby Blinking fast Battery low, charging Battery low, Bluetooth Solid connected...
Safety Precautions Please read all the instructions and warnings in this manual carefully before using this product to ensure the proper functioning of the device and your safety. *Warnings Don't disassemble the product Do not wipe the product with Do not use the product without authorization.
Page 12
11 · 12 The battery contains special protection circuit and device, please do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help; Do not expose the product and the power adapter to high temperature or high humidity.
Related Statements FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 14
European Union. Hereby, [Wuhan Jingchen Intelligent Identifification Technology Co., Ltd.] declares that the radio equipment type [NIIMBOT B18] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet...