NIIMBOT B18 Quick Reference Manual

Quick installation
01.Label installation
buckle
Please select thermal transfer label paper
compatible with the B18 printer.
Pull the buckle up to open the cover. Insert a label roll with the chip facing up.
2
This side down
Ribbon mark
Tighten the tape counterclockwise as indicated, then load
4
the chip face down in the card slot.
This side up
Align and pull gently the label paper out of the
3
guide slot until the split after the first label.
Packing List
1 × B18 Label Printer
1 × USB TYPE-C Data Cable
1 × Label paper
1 × Ribbon
Close and buckle the cover. 1 × Quick-Reference Guide
5
APP download
02.How to download the APP
Search for "NIIMBOT" on the Google play or Apple store,
1
download and install the APP.
NIIMBOT
Design & Print APP
easy to download and use
Guide slot
Split
Please check the APP for more instructions.
Open the NIIMBOT APP Me Help Center
For more functions used in home application, our APP "NIIM" is
2
recommended to download and install.
NIIM
Design & Print APP
easy to download and use
APP connection
03.How to connect via Bluetooth
Open the "NIIMBOT" APP first, then turn on the Bluetooth
of cellphone.
8:30
Turn on bluetooth
NIMBOT
Hardware Instructions
Click on the APP homepage to connect to the label printer
and select the corresponding device model,
Note: Generally, the PIN code is 0000 or 1234. Enter the
PIN code and press "OK".
After the connection is successful, click "Current Label Template"
3
on the home page to enter the editing page.
Special Note
The illustrations of the product, accessories, software interface, etc.
in this Getting Started Guide are schematic diagrams and are for
reference only. Due to product updates and upgrades, the actual
product may be slightly different from the schematic diagram.
Please refer to the actual product. Reserve the right to improve the
technology of product without piror notice.