Installation Swipe left on the slider to open the lid. Paper Compartment Baffle Remove or keep the baffle according to the width of the label paper. About the baffle: Insert the label paper directly if your label paper is not wider than 15mm. If its width is 15mm-27mm, remove the baffle before installing.
Page 5
03 · 04 Right Left After confirming the width, install it against the right side of the paper compartment, with the print side facing down. Power Button Close the lid. Long-press the power button and the printer will be ready for use.
Installing App Before using the printer, please install the NIIMBOT app from Google Play or the App Store. NIIMBOT Design & Print APP easy to download and use More information available on the NIIMBOT app. Sign in to NIIMBOT Help Center Hardware Get the NIIM app for more label designs for homes.
05 · 06 Connecting and Printing Open NIIMBOT app and turn on Bluetooth on your phone. 8:30 Turn on Bluetooth NIIMBOT On Home, tap Connect smart label printer. Then select device model. Notice: If a PIN code is required, input 0000 or 1234.
Basic Functions Function Operation Switch on Hold down the Power button for three seconds. Hold down the Power button for three seconds when Switch off the device is on. Print history Press the Power button once when the device is on. Print a test page Double-press the Power button when the device is on.
07 · 08 LED Indicators Indicator Status Description Blue Blinking slowly Standby Blue Blinking fast Charging Blue Solid Bluetooth connected Blinking slowly Battery low, standby Blinking fast Battery low, charging Battery low, Bluetooth Solid connected...
09 · 10 Safety Precautions Please read all the instructions and warnings in this manual carefully before using this product to ensure the proper functioning of the device and your safety. *Warnings Don't disassemble the product Do not wipe the product with Do not use the product without authorization.
Page 12
The battery contains special protection circuit and device, please do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help; Do not expose the product and the power adapter to high temperature or high humidity.
11 · 12 Related Statements FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 14
EU member states. This device can be used in European Union. Hereby, [Wuhan Jingchen Intelligent Identifification Technology Co., Ltd.] declares that the radio equipment type [NIIMBOT D11] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://www.niimbot.com.
Page 15
13 · 14 L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.