Subscribe to Our Youtube Channel
Related Manuals for Roborock Qrevo S
Summary of Contents for Roborock Qrevo S
- Page 1 Roborock Qrevo S Robotic Vacuum Cleaner User Manual Read this user manual with diagrams carefully before using this product and store it properly for future reference.
- Page 3 English Français Deutsch Italiano Español Nederlands Polski Norsk Svenska...
-
Page 4: Table Of Contents
English Contents Safety Information Product Overview Installation Connecting to the App Instructions for Use Routine Maintenance Basic Parameters Common Issues... -
Page 5: Safety Information
WARNING • For the purposes of recharging the battery, only use the detachable docking station roborock EWFD24HRR provided with this product. • The product must be switched off and the plug must be removed from socket outlet before cleaning or maintaining the product. - Page 6 Safety Information • To prevent corrosion or damage, do not use any disinfectant and only use cleaning solution recommended by Roborock in the water tank. • Do not put any low objects (such as shoes, mats) near raised areas like stairs. Otherwise, the robot may fall down caused by malfunctional sensors.
-
Page 7: Product Overview
Product Overview A2-8—Mop Cloths Dustbin A2-9—Cliff Sensors A6-1—Dustbin Latch Robot (Top View) A6-2—Air Inlet Robot (Top Cover Open) A6-3—Washable Filter —Power/Clean A3-1—Vertical Bumper A6-4—Suction Inlet • Press and hold to turn the robot A3-2—LiDAR Sensor on or off Dock Base A3-3—WiFi Indicator Light •... -
Page 8: Installation
A10-17—Water Level Float Attach the base by pressing down • The dock status indicator light turns red if an error occurs. • Place the dock on a flat floor away from fire, heat, and A10-18—Cleaning Tank Filter both sides of the base firmly, and water. -
Page 9: Connecting To The App
In • If the robot waits more than 30 minutes for a connection, Search for “Roborock” in the App Store or WiFi will be automatically disabled. If you want to so doing, the robot cleans all zones one by reconnect, reset the WiFi before proceeding. - Page 10 Note: After spot cleaning, the robot will automatically the dock for mop washing and water Notes: return to the starting point and be on standby. • Drying duration can be modified in the app. tank refilling to maximize its mopping •...
-
Page 11: Routine Maintenance
Restoring Factory Settings D1-9—Reinstall the main brush cover. Make Dustbin sure that the four teeth are fully * Clean as required. If the robot does not function properly after seated in the slot, and then press on D5-1—Open the top cover of the robot and a system reset, switch it on. -
Page 12: Basic Parameters
Basic Parameters Charging Contact Areas Note: A dirty mop cloth will affect the washing performance. Clean it before use. * Clean monthly. D7-2—Stick the mop cloth on the mount in Robot Use a soft dry cloth to wipe the charging position and firmly. -
Page 13: Common Issues
• Dock not connected to power. Check whether both • Unable to connect to WiFi abruptly. There may be an ends of the power cord are properly connected. error with your router settings. Contact Roborock Customer Unable to • Poor contact. Clean the charging contacts of the dock Service for help with troubleshooting. - Page 14 Common Issues Issue Solution Issue Solution The robot • Auto-emptying is disabled. Check in-app settings. • The wall sensor, cliff sensors, or carpet sensor may be suddenly misses • Dock dust container cover is not installed. Check and install. dirty. Wipe them with a soft dry cloth. a certain spot.
Need help?
Do you have a question about the Qrevo S and is the answer not in the manual?
Questions and answers
How does the vacuum do additional levels?
I’ve had my robovac Qrevo S for several months now. I have not found a setting on the app to vacuum only. Does it vacuum only? When I set it to vacuum & mop it seems to begin with mopping, even on carpets. Is there a vacuum setting & how do I have it vacuum & then mop in that order?