Häfele 911.83.731 Installation Instructions

LEVERSET INSTALLATION INSTRUCTIONS
1. Door Preparation
C
Fold installation template
at preferred height.
A Mark centre for either passage or
privacy set
B Mark holes for through-bolt fixing
where required
C Mark centre of door on
horizontal centreline
4. Remove Rose Caps
2. Drill Holes
C
B
A
B
A Drill a Φ35mm hole through the door for
privacy sets and a Φ25mm hole for
passage set.
B Drill 2xΦ5mm holes through the door where
through-bolt fixing is required
C Drill a Φ25mm hole about 85mm deep
into the front edge of the door.
3.Install Latch
B
A
B
A Insert latch into hole. Trace around
face plate.
B Chisel out wood until faceplate fits
flush with door edge
C Fasten latch to door so bevelled
edge of latchbolt faces jamb
5. Install Furniture
C
A Insert spindle into furniture, as illustrated
B Attach furniture to door by through-bolt fixing.
Cut through-bolt screws to appropriate length so
it is flush against the rose when tightened.
Fit self-tapping wood screws to strengthen the
rose where necessary.
C Use captive nuts from the other side of door to
align with through-bolts.
B
A
C
A
B
1/2