IEM Mobil-O-Graph Instructions For Use Manual page 381

Audible signals
The audible signals generated by the device consist of individual or multiple tone burst sequences. The following
tone burst sequences are emitted:
Tone burst
1 tone burst
3 tone bursts
Continuous tone bursts
Heard when
Switching on and off

Starting and ending measurement (except during the night-time

interval)
Removing the interface cable, ending IR communications,

establishing and ending Bluetooth
Measurement errors

System error

Serious system error (e.g. the cuff pressure is greater than 15 mmHg

for more than 10 seconds outside the measurement)
communications
®
Appendix
EN
65