Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting
5.2 Transmission error
To avoid an error during data transmission, the blood pressure monitor includes a check of the data sent. If an error
has occurred, E004 will appear on the display.
5.3 Checklist
Please go through the following checklist if you have encountered errors when handling the Mobil-O-Graph
errors have simple causes.
Check that all cables are firmly connected and/or that the infrared interface is correctly aligned with the
device.
Check if the blood pressure monitor, computer and printer are switched on (depending on the version you
have received).
Check that the connection cable is connected to the correct serial interface (COM1 to COM4).
Check that the rechargeable batteries are sufficiently charged.
Note
Some errors are combined with a continuous alarm for safety reasons. The continuous alarm can be ended
by pressing any button. If there is residual pressure inside the cuff, open the cuff immediately.
44
. Many
®
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Mobil-O-Graph and is the answer not in the manual?
Questions and answers
What does Error 10 mean?
Error 10 on the IEM Mobil-O-Graph indicates a serious malfunction due to pressure buildup outside the measurement process, meaning the pump was activated improperly. This error suggests a critical program code failure. The device should be sent immediately for inspection and repair to the dealer or directly to IEM GmbH.
This answer is automatically generated