Specifying The Desired Measurement Log - IEM Mobil-O-Graph Instructions For Use Manual

Specifying the desired measurement log

You have the option, using the HMS CS, to adjust the following settings for the measurement log:
Beginning of 4 different daily intervals

Number of measurements per hour in the 4 daily intervals

Enable/disable the acoustic signals for the daily intervals

Enable/disable the optional PWA

Choose between 24-hour ABPM and in-clinic monitoring

Turn the display on/off.

As soon as you have conducted a measurement, the log can only be changed once you have completely deleted
all data.
You can set the log manually by pressing and holding the day/night button while simultaneously pressing the event
button. Use the start/stop button to change the log and confirm with the event button.
Note:
To use practice monitoring a Bluetooth
supplier or directly from IEM GmbH.
Setting the logs via software
To set the protocols using the software please refer to the HMS CS instructions for use for the
respective patient data management software.
interface is required; you can obtain one of these via your specialist
®
Product description
EN
29