Warranty and repair conditions
Repairs:
If the device malfunctions or if you experience continuous measurement errors, contact
your Mobil-O-Graph
instructions.
Do not open the housing.
Metrological
As proof of continuous compliance to "Basic Requirements" pursuant to Directive
checks:
93/42/EEC, the Mobil-O-Graph
every two years. In certain countries, this requirement may be regulated by national laws or
regulations.
Liability clause:
In all cases where IEM is obliged to pay damages or reimburse expenses on the basis of
contractual or statutory claims, IEM is liable only to the extent that its executives and
vicarious agents are guilty of intent or gross negligence. Strict liability according to the
Product Liability Act remains unaffected. Liability for the culpable breach of essential
contractual obligations also remains unaffected, however, except in the cases of clauses 1
and 2, liability is limited to foreseeable damage which is typical for this type of contract.
A change in the burden of proof to the disadvantage of the customer is not connected with
the above regulations. Liability for quality or durability guarantees or fraudulent
concealment of defects is not affected by the provisions outlined above.
56
specialist supplier or IEM GmbH directly for repairs and shipping
®
ATTENTION
Once the device has been opened, any warranty will no longer be valid.
blood pressure monitor must undergo metrological checks
®
Need help?
Do you have a question about the Mobil-O-Graph and is the answer not in the manual?
Questions and answers
What does Error 10 mean?
Error 10 on the IEM Mobil-O-Graph indicates a serious malfunction due to pressure buildup outside the measurement process, meaning the pump was activated improperly. This error suggests a critical program code failure. The device should be sent immediately for inspection and repair to the dealer or directly to IEM GmbH.
This answer is automatically generated