Download Print this page

Knightsbridge SA3040RW Series Installation & Maintenance Manual

Advertisement

Quick Links

INSTALLATION & MAINTENANCE MANUAL
SA3040RWxx

Advertisement

loading
Need help?

Need help?

Do you have a question about the SA3040RW Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Knightsbridge SA3040RW Series

  • Page 1 INSTALLATION & MAINTENANCE MANUAL SA3040RWxx...
  • Page 2: General Instructions

    GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: SA3040RWxx SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
  • Page 3 Cut a suitable hole in the mounting surface as per the cut-out details (see Fig. 1) ensuring not to manufacturer of the sensors that they are compatible with LED luminaires. infringe with any joists, gas/water pipes or electrical cables • Provide power to the required point of installation Cut a suitable hole in the mounting surface as per the cut-out details (see Fig.
  • Page 4 Fig. 3 Fig. 3 • Adjust the DIP switches on the driver to the required wattage (see Fig. 4) Adjust the DIP switches on the driver to the required wattage (see Fig. 4) • Fig. 3 DIP Switch 30W 750mA 35W 850mA 40W 950mA Adjust the DIP switches on the driver to the required wattage (see Fig.
  • Page 5 • Connect the driver to the mains supply ensuring the correct polarity is observed: L N – Neutral (blue) Refit the terminal cover • Select the required colour temperature via the three-position switch • WARNING Insert the panel into the ceiling and ensure it is secure •...
  • Page 6: Warranty

    WARRANTY This product has a warranty of 5 years from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement.
  • Page 7 SUPPLIED BY: (UK) MANUFACTURER ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLE LU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) AUTHORISED REPRESENTATIVE SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY EMAIL: EPREL@GROUP.SLV.COM MADE IN CHINA -25~ 230V >80 45°C 50Hz HWAUG23_V1...

This manual is also suitable for:

Sa3040rwSa3040rwadSa3040rwdali