Download Print this page

Knightsbridge SHE1BS Installation & Maintenance Manual

Hide thumbs Also See for SHE1BS:

Advertisement

Quick Links

INSTALLATION & MAINTENANCE MANUAL
SHE1BS / SHE1GS / SHE2BS
SHE2GS

Advertisement

loading
Need help?

Need help?

Do you have a question about the SHE1BS and is the answer not in the manual?

Questions and answers

Summary of Contents for Knightsbridge SHE1BS

  • Page 1 INSTALLATION & MAINTENANCE MANUAL SHE1BS / SHE1GS / SHE2BS SHE2GS...
  • Page 2: General Instructions

    These instructions should be used to aid installation of the following products: SHE1BS / SHE1GS / SHE2BS / SHE2GS SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
  • Page 3 t polarity is observed, carefully wire as shown in Fig. 1 Fig. 1 Ensure the earth lead on the LED plate is secured correctly to the earth lead on the body of the fit • Ensure the earth lead on the LED plate is secured correctly to the earth lead on the body of the fitting Fix the LED tray to the body h lead on the LED plate is secured correctly to the earth lead on the body of the fitting •...
  • Page 4: Dip Switch Settings

    Replace the diffuser ensuring seal is in place • • Switch on and check for correct operation SENSOR DIP SWITCH LAYOUT SENSOR DIP SWITCH LAYOUT DIP SWITCH SETTINGS DIP SWITCH SETTINGS DIP SWITCH SETTINGS...
  • Page 5 WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. This product is not suitable for installation in or near a coastal or marine environment.
  • Page 6: Warranty

    GENERAL This product contains a light source of energy efficiency class C to Regulation (EU) No. 2019/2015. This product contains a non-replaceable LED light source and a control gear which can be replaced by a professional. Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product.
  • Page 7 SUPPLIED BY: (UK) MANUFACTURER ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLE LU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) AUTHORISED REPRESENTATIVE SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY EMAIL: EPREL@GROUP.SLV.COM -20°C~ 50°C AVJUL22_V3...
  • Page 8 Manufacturers Declaration of Conformity For ML Accessories (Knightsbridge) Electrical products in accordance with CE marking ML Accessories Ltd. Declare that all products have been designed, manufactured, and tested in accordance with the requirements of the relevant legislation CE marking legislation...
  • Page 9 Manufacturers Declaration of Conformity For ML Accessories (Knightsbridge) Electrical products in accordance with UKCA marking ML Accessories Ltd. declare that all products have been designed, manufactured, and tested in accordance with the requirements of the relevant legislation UKCA marking legislation UK SI 2016 No.

This manual is also suitable for:

She1gsShe2bsShe2gs