Page 2
GENERAL INSTRUCTIONS SHExx These instructions should be read carefully and retained after installation by the end-user for future reference and maintenance. These instructions should be read carefully and retained after installation by the end u These instructions should be used to aid the installation of the following products: maintenance.
Page 3
Connect the Live (brown), Neutral (blue) and Earth (green/yellow) to the terminals on block of the LED plate, ensuring the cable is secured in the cable clamp (see Fig. 2) Fig. 2 Ensure the earth lead on the LED plate is secured correctly to the earth lead on the body of •...
Page 4
end, on commissioning the installation, a minimum charge period of 24 hours an emergency duration test SENSOR LAYOUT SENSOR LAYOUT DIP SWITCHES DIP SWITCH LAYOUT DIP SWITCH SETTINGS DIP SWITCH LAYOUT Detection Area...
Page 5
DIP SWITCH SETTINGS DIP SWITCH SETTINGS Open Close 5 Lux 25 Lux 10 Lux 50 Lux 25 Lux 75 Lux 50 Lux 100 Lux 100 Lux 200 Lux 150 Lux 300 Lux 200 Lux 400 Lux VIII Disable • When the ambient light level is below the “Open” lux level, the sensor switches on the luminaire. When the When the ambient light level is below the “Open”...
Need help?
Do you have a question about the SHE P Series and is the answer not in the manual?
Questions and answers