Page 2
These instructions should be read carefully and retained by the end-user after installation for future reference and maintenance. These instructions should be used to aid the installation of the following product: SPIKE5S SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
Page 3
a position for the luminaire ensuring the ground is suitable to firmly hold the spike and luminaire n. Check the ground is not liable to flooding and the spike does not infringe with any und pipes or cables (see Fig. 1) •...
Page 4
WARNING This luminaire must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. This product is not suitable for installation in or near a coastal or marine environment. GENERAL The light source of this luminaire is not replaceable;...
Page 5
WARRANTY This product has a warranty of 2 years from the date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement.
Page 6
INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS ~35°C ML Accessories Limited LU5 4LT www.mlaccessories.co.uk AVOCT21_V4...
Need help?
Do you have a question about the SPIKE5S and is the answer not in the manual?
Questions and answers