Property 0X33 - Card Inserted (Msr Insert Only | Contact Only) - Magtek mDynamo Programmer's Manual

8 - Properties

8.10 Property 0x33 - Card Inserted (MSR Insert Only | Contact Only)

0x33
Property ID:
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: No
Default Value: None
The host can use this read-only property to determine whether a card is fully inserted into the device. If a
card is fully inserted, this equals 0x01, otherwise it equals 0x00.
For eDynamo, this property is available in firmware revisions 1000003354E00 (released June 2017) and
later.
For mDynamo, this property is available in firmware revisions 1000003358C00 (released June 2017) and
later.
Example Get Request (Hex)
Cmd Num
00
Example Get Response (Hex)
Result Code
00
mDynamo| OEM Secure Card Reader Authenticator | Programmer's Manual (COMMANDS)
Data Len
01
Data Len
01
Page 113 of 167 (D998200151-200)
Property ID
33
Property Value
01