Magtek mDynamo Installation And Operation Manual
Hide thumbs
Also See for mDynamo:
- Installation and operation manual (27 pages) ,
- Instruction manual (61 pages) ,
- Manual (44 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Magtek mDynamo
Summary of Contents for Magtek mDynamo
- Page 1 Outdoor Bezel IP34 Rated EMV Chip Card Module Installation and Operation Manual June 2022 Document Number: D998200546-10 REGISTERED TO ISO 9001:2015 MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com...
- Page 2 Microsoft®, Windows®, and .NET® are registered trademarks of Microsoft Corporation. All other system names and product names are the property of their respective owners. mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 2 of 23 (D998200546-10)
- Page 3 Table 0-1 - Revisions Rev Number Date Notes Jun 30, 2022 Initial Release mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 3 of 23 (D998200546-10)
-
Page 4: Limited Warranty
MagTek’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from MagTek (the “Warranty Period”). This warranty shall apply only to the “Buyer” (the original purchaser, unless that entity resells the product as authorized by MagTek, in which event this warranty shall apply only to the first repurchaser). - Page 5 MAGTEK’S SOLE LIABILITY AND BUYER’S EXCLUSIVE REMEDIES ARE STATED IN THIS SECTION AND IN THE SECTION RELATING TO MAGTEK’S LIMITED WARRANTY. mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 5 of 23 (D998200546-10)
-
Page 6: Fcc Information
Reduction of Hazardous Substances (RoHS) European Directive 2002/95/EC. The marking is clearly recognizable, either as written words like “Pb-free,” “lead-free,” or as another clear symbol ( mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 6 of 23 (D998200546-10) -
Page 7: Table Of Contents
Mechanical Maintenance ......................19 Updates to Firmware, Documentation, Security Guidance............19 Developing Host Software ........................20 Appendix A Technical Specifications ....................... 21 mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 7 of 23 (D998200546-10) -
Page 8: Introduction
Remote Services About Terminology In this document, mDynamo with Outdoor Bezel is referred to as the device. It is designed to be connected to a host, which is a piece of general-purpose electronic equipment which can send commands and data to, and receive data from, the device. Host types include PC computers/laptops, tablets, and smartphones. - Page 9 Determine what documentation and training will be required from solution design through testing and field deployment. • Determine what type of host mDynamo with Outdoor Bezel will connect to. When planning, include any additional support or devices required by the host and its connection, such as physical locations, mounting, and power connections.
-
Page 10: Handling
Avoid touching the exposed pins on the connectors when handling the device. For information about ongoing maintenance of the device, such as cleaning, see section 5 Maintenance. mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 10 of 23 (D998200546-10) -
Page 11: Electrical Integration
Review section 5 Maintenance and develop a maintenance procedure and schedule. When installed in the solution-specific enclosure, the device may require additional maintenance not covered in the general guidelines provided here. mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 11 of 23 (D998200546-10) -
Page 12: About The Connectors
2 - Electrical Integration About the Connectors mDynamo with Outdoor Bezel provides a permanently attached USB cable (see Figure 2-1 - Using the Alternate Earth Grounding Standoff). A USB Device port must be connected directly to a host’s USB port, or connected to the host via a powered USB hub, to provide power to the device and bidirectional communication with the host. -
Page 13: Grounding / Esd Protection
USB port on the device’s board. This will help make an informed decision about proper grounding. There are two paths to provide earth ground to the device; MagTek recommends all solution designs bring in earth ground to the device using one and only one of the possible paths: •... -
Page 14: Shielding And Conditioning
The device has no special requirements for power conditioning or signal conditioning. mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 14 of 23 (D998200546-10) -
Page 15: Mechanical Integration
Review section 5 Maintenance and develop a maintenance procedure and schedule. When installed in the solution-specific enclosure, the device may require additional maintenance not covered in the general guidelines provided here. mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 15 of 23 (D998200546-10) -
Page 16: Dimensions
Overall dimensions of the device are shown in Figure 3-1 - mDynamo with Outdoor Bezel Mechanical Dimensions in Inches [mm] - Front View. On request, MagTek can provide a 3D model of the device’s envelope to assist with the mechanical portion of solution design. MagTek strongly recommends building and testing prototypes with actual devices before finalizing the solution design. -
Page 17: Mounting
Installation height and pitch are factors in meeting this requirement. Mounting mDynamo with Outdoor Bezel is an IP34 rated device. Mounting is dependent on customer design; however, it is recommended that the built-in external drain be facing down to ensure proper drainage should moisture enter the interior of the device. -
Page 18: Operation
Card Reading / Transactions Transactions begin when the host software initiates them. Cardholders should insert cards according to the card orientation guide on the bezel (see Figure 3-2 - mDynamo with Outdoor Bezel Mounting Orientations). If a cardholder inserts a contact chip card, the device detects the chip and attempts to communicate with the card. -
Page 19: Maintenance
DO NOT use liquid cleaning products or insert any other objects into the device. Periodic cleaning of mDynamo with Outdoor Bezel’s exterior may be required. To clean the outside of the device, wipe down the device with a soft, damp cloth and then wipe with a dry cloth. -
Page 20: Developing Host Software
Support When developing host software, it is important to note that mDynamo with Outdoor Bezel is a combination of two devices integrated into a common enclosure: • mDynamo with Outdoor Bezel’s primary control unit and chip card reader is MagTek’s mDynamo. -
Page 21: Appendix A Technical Specifications
Display Size (viewable area): Not Applicable Display Resolution: Not Applicable Keypad: Not Applicable Security Characteristics Certifications: Not Applicable Tamper Protection: Not Applicable mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 21 of 23 (D998200546-10) - Page 22 -4°F to 149°F (-20°C to 65°C) Storage Relative Humidity: 5% to 90% non-condensing Vibration Resistance: Not Applicable Shock Resistance: Not Applicable mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 22 of 23 (D998200546-10)
- Page 23 Not Applicable Reliability Shelf Life: Not Applicable EMV Insertions: 500K Battery Shelf Life: Not Applicable Battery Cycle Life: Not Applicable mDynamo with Outdoor Bezel| IP34 Rated EMV Chip Card Module | Installation and Operation Manual Page 23 of 23 (D998200546-10)