Support For Connecting Digital Memory Devices To The Printer; Memory Card Slots; Memory Cards Supported - Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Number
17
18
19

Support for connecting digital memory devices to the printer

Your All-in-One printer allows you to connect both digital camera memory cards and USB-
connected devices for previewing and printing. You can also transfer photos and document
files to your connected computer.
Caution:
both memory card slots, or any memory card slot and the host USB port have a
device connected to them simultaneously, the printer cannot access the photos
or documents contained on any of them. If your printer cannot recognize a device
you have connected to it, make sure that only one device is connected at a time.

Memory card slots

Although this All-in-One printer has two card slots, insert and use only one memory card
at a time.
Warning:
damage the card.
A blue light, located above the memory card slots, blinks while the card is being accessed
and stays lit while the card remains in the slot and the printer is on.

Memory cards supported

The Kodak ESP 7 All-in-One printer supports the following memory cards, used in most
digital cameras:
XD xD-Picture Card
MS Memory Stick, Memory Stick Pro and Magic Gate
SD Secure Digital Card, Multi-Media Card
Kodak ESP 7 Printer User Guide
Rear-access cleanout area
Printer access door
Printhead
Connect only one external memory device to your printer at a time. If
Do NOT remove the memory card while the light blinks, or you may
Component name
Chapter 2
5