Table of Contents
Advertisement
Printing the network configuration
Installing your printer on additional computers on the network
Connecting to another KODAK All-in-One Printer
To print the current network configuration:
1. Load plain paper into the printer. (See
2. Press Home.
3. Press
to select Network Settings, then press OK.
4. Press
to select Print Network Configuration, then press OK.
To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer. Go to and follow the on-screen
instructions.
1. Go to www.kodak.com/go/aiodownloads.
2. In the results list, click the link for KODAK All-in-One Printer Software for your
computer's operating system.
3. Follow the on-screen instructions.
If you are connecting to a newer model printer (for example, you have an ESP 5250
Printer and now you are adding a HERO 5.1 Printer), you must install the software for
the newer model.
NOTE: When you install the new software, the printer driver for the ESP 5250
Printer will be uninstalled, and updates for the ESP 5250 Printer will be
installed in addition to the driver for the HERO 5.1 Printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > KODAK Printer Setup Utility.
• If your wireless printer (example: KodakHERO5.1+1133) is not listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer.
c. Select Network - Wireless / Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
• If your wireless printer (example: KodakHERO5.1+1133) is listed:
a. Select the printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done.
www.kodak.com/go/aiosupport
KODAK HERO 5.1 All-in-One Printer
Loading plain paper, page
38.)
12
Hide quick links:
Advertisement
Table of Contents
