Using The Control Panel; Adjusting The Control Panel Position; Using The 4-Way Navigation Buttons - Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Using the control panel

Adjusting the control panel position

The position of the control panel can be adjusted from its default position (flush against
the front of the printer) to lifted upward at an angle.
To adjust the control panel position:
1 On the rear side of the control panel, locate the release tab.
2 Press the front of the control panel and the release tab toward each other with your
thumb and fingers; maintain this position and pull the control panel toward you gently.
3 When you are satisfied with the position of the control panel, let go.
4 To return the control panel to its default position, squeeze the release tab and gently
push the control panel away from you. Let go when the panel is seated against the front
panel of the printer.

Using the 4-way navigation buttons

Note:
the control panel. Its use is described on page 10.
The 4-way navigation buttons allow you to update the content displayed on the LCD
screen.
•
Pressing
menu is highlighted, pressing
following page in a multi-page menu, with the top row highlighted; in a one-page menu,
this action highlights the top item.
•
Pressing
Kodak ESP 7 Printer User Guide
OK
The button is located in the center of the 4-way navigation buttons on
highlights the next row down in the visible menu. When the last row in a
causes the visible page to be replaced with the
returns you to the previous page in a multi-page menu.
Chapter 2
9