Unsupported Authentication Or Encryption Type; Invalid Wep Key - Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Probable Cause 5
The wireless settings on the printer do not match the wireless settings of your access
point.
Corrective Action
Print a network configuration page to compare the wireless settings of the printer with the
wireless settings for your access point. Change either the device or access point settings
so that both the printer and the access point have matching wireless settings.
Probable Cause 6
You entered the wrong mode (ad hoc or infrastructure) or security type.
Corrective Action
Enter the correct mode or security type. Print a network configuration page to compare the
wireless settings of the printer with the wireless settings for your access point. Change
either the device or access point settings so that both the printer and the access point have
matching wireless settings.
Probable Cause 7
MAC filtering is enabled on your access point.
Corrective Action
Keep MAC filtering enabled, but change the settings to allow the access point to
communicate with the printer.

Unsupported authentication or encryption type

Probable Cause
Your network is configured with an authentication protocol not supported by the Kodak
All-in-One printer.
Corrective Action
Open the Embedded Web Server of your access point and change the security settings.
Use one of the supported protocol types.
Note:
MD5, EAP-TLS, and EAP-TTLS.

Invalid WEP Key

Probable Cause 1
An invalid WEP key was entered.
Kodak ESP 7 Printer User Guide
Types not supported include WPS, WPA2-Enterprise, LEAP, PEAP, EAP-
Chapter 9
93