Subscribe to Our Youtube Channel
Related Manuals for Dreame Bot Z10 Pro
Summary of Contents for Dreame Bot Z10 Pro
- Page 1 Auto-Empty Robot Vacuum and Mop User Manual For more information, please visit www.dreame-technology.com Manufactured by: Dreame Trading (Tianjin) Co., Ltd. Made in China RLSD5-EU-R00 Read this manual carefully before use and keep it for future reference.
-
Page 2: Safety Information
Content Safety Information Usage Restrictions User Manual This product can be used by children aged 8 years and above and persons with physical, sensory, intellectual deficiencies, or limited experience or Benutzerhandbuch knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risks. - Page 3 Do not place the auto-empty base near a heat source. Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLSD5 is in compliance Do not use a wet cloth or wet hands to wipe or clean the base's charging with Directive 2014/53/EU.
-
Page 4: Product Overview
Product Overview Product Overview Accessories Robot Spot Clean Button • Press briefly to begin Spot Clean Mode Power/Clean Button • Press and hold for 3 seconds • Press to begin cleaning after the robot is powered on Status Indicator • White: Cleaning or cleanup is completed Cleaning Tool Side Brush Power Cord... - Page 5 Product Overview Product Overview Robot Auto-Empty Base Auto-Empty Base (Open the upper cover) Cliff Sensor Reset Button • Press and hold for 3 Upper Cover seconds to restore the robot to factory settings Status Indicator Charging Contacts Charging Contacts White: The base is plugged in Omnidirectional Wheel Breathing White: Robot is charging Side Brush...
- Page 6 Product Overview Clearing Home Environment Dust Bin Mopping Module Bin Clip Bin Cover Water Tank Filter Water Tank Release Clip Water Inlet Dust Intake Mop Pad To improve the working efficiency of your robot, put away any loose cords , Before cleaning, place a physical barrier at the edge of the stairs and rags, slippers, toys, etc.
-
Page 7: Preparation Before Use
" in the upper right. Click Then tap " " in the top right corner, scan the QR code, add "Dreame Bot > 0.5 m Z10 Pro", and follow the prompts to finish the connection. Put away the power cord... -
Page 8: How To Use
3. Cleaning Mode Note: Dreame Bot Z10 Pro has four cleaning modes: Quiet, Standard, Strong, and • Follow the instructions on the app interface to use more functions. Note: When the robot is charging or not in use, remove the mopping module, Turbo. -
Page 9: Routine Maintenance
Routine Maintenance Routine Maintenance Clean the Dust Bin Clean the Mopping Module 1. Press the two release clips on the side of the water tank, remove the 3. Clean the mop pad with water only and leave to air dry before re-installing. 1. - Page 10 Routine Maintenance Routine Maintenance Clean the Main Brush Clean the Side Brush Note: Wet cloths can damage sensitive elements within the robot and base. Please use dry rags for cleaning. Press the brush guard clips inwards to remove the brush guard and lift the Pull out the side brushes and use the cleaning tool to remove any hair brush out of the robot.
- Page 11 Routine Maintenance Routine Maintenance Replace the Dust Collection Bag Clean the Air Duct 3. Reinstall the air duct cover as shown in the diagram. According to the status indicator (blinking orange) and app prompts, replace it with a new one when the dust collection bag is full. It is recommended to replace If the air duct is blocked, please clean it according to the following steps.
-
Page 12: Status Indicator
Status Indicator The following table lists possible causes and solutions in terms of different light status. For more support, Problem Type Solution please refer to the section "FAQ" in this manual. The battery level is low. Recharge the robot on the base, then try it again. Light Status Possible Cause Solution... - Page 13 Problem Type Solution Problem Type Solution If you manually press the dock button to recharge the robot, or move it back to the base, and if the cleaning There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest version of the Mi Home/ Robot returns to the base without Xiaomi Home app, then try reconnecting.
-
Page 14: Specifications
Specifications Robot Auto-Empty Base Model RLSD5 Model RCS2 5200mAh Battery Rated Input 220-240 V~ 50-60 Hz (Battery Nominal Capacity) Wireless Wi-Fi IEEE 802.11b/g/n 2.4 GHz Rated Output 19.8 V Connectivity Charging Time Approx. 6 hours Rated Power 600 W Rated Voltage 14.4 V Under normal use of condition, this equipment should be kept a separation ...
Need help?
Do you have a question about the Bot Z10 Pro and is the answer not in the manual?
Questions and answers
ΜΠΟΡΕΙΤΕ ΝΑ ΜΟΥ ΣΤΕΙΛΕΤΕ ΤΟ ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ ΣΤΑ ΕΛΛΗΝΙΚΑ ΣΑΣ ΕΥΧΑΡΙΣΤΩ ΓΙΑ ΤΗΝ Ζ10