Table of Contents
Advertisement
2.9 Serial A
2.9 Serial AT T T T T A (SA
2.9 Serial A
A (SA
A (SAT T T T T A) / Serial A
A (SA
2.9 Serial A
2.9 Serial A
A (SA
Installation
Installation
Installation
Installation
Installation
This motherboard adopts nVidia
supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks and RAID functions.
You may install SATA / SATAII hard disks on this motherboard for internal storage
devices. This section will guide you to install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2.10
2.10
Driver Installation Guide
Driver Installation Guide
2.10
2.10
2.10 Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.11
2.11
2.11 HDMR Card Driver Installation
HDMR Card Driver Installation
HDMR Card Driver Installation
HDMR Card Driver Installation
2.11
2.11
HDMR Card Driver Installation
When you install the drivers to your system, please make sure to install Realtek
Audio driver before installing HDMR card driver; for other drivers installation,
please follow the driver order in our support CD. It is suggested to install Win-
®
dows
OS, Realtek Audio and HDMR drivers with the HDMR card inserted to this
motherboard; in this way, there is no problem on the Audio CODEC function.
However, if you install Windows
plan to insert the HDMR card to this motherboard, please install the Realtek Audio
driver again; otherwise, the Audio CODEC will not work. If you install Windows
2000 / XP OS without HDMR card inserted and plan to insert the HDMR card to this
motherboard, you just have to restart your computer, then the Audio CODEC can
work successfully.
A) / Serial AT T T T T AII (SA
A) / Serial A
A) / Serial A
AII (SA
AII (SAT T T T T AII) Hard Disks
AII (SA
A) / Serial A
AII (SA
®
nForce 410 MCP southbridge chipset that
®
XP 64-bit OS without HDMR card inserted and
2 1
2 1
2 1
2 1
2 1
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
AII) Hard Disks
®
Advertisement
Table of Contents
Need help?
Do you have a question about the K8NF4G-VSTA and is the answer not in the manual?