Short Information; Introduction; Parts Included; Functional Requirements - Bosch LECTUS secure ARD-SIGR20-SEO Installation Manual

6 en | Short information
2

Short information

2.1

Introduction

This installation manual is aimed at authorized service providers. It contains instructions on
the installation and configuration of the Bosch Security Systems proximity reader LECTUS
secure.
2.2

Parts included

Quantity
1
8
1
2
1
2.3

Functional requirements

The LECTUS secure reader reads data from contactless RFID credentials and sends the data
to a higher-level control center. This is where the evaluation takes place as to whether the
credential is authorized or not.
The result is sent back to the reader, which then provides a visual and an acoustic signal.
Communication between the reader and the control center takes place through a Wiegand
interface.
2024-04 | V01 |
x2 x2
Component
Reader module
Screws
Quick installation guide
Safety and security information
OSS information
Installation manual
x3 x1
Bosch Security Systems B.V.
LECTUS secure