1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Digital Signage
  5. SI-663-N
  6. User manual

IBASE Technology SI-663-N User Manual

12th gen intel core processor fanless signage player with hdmi / dp / dvi-d
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SI-663-N
12th Gen Intel® Core™ Processor
Fanless Signage Player
with HDMI / DP / DVI-D
User's Manual
Version 1.0
(May 2024)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SI-663-N and is the answer not in the manual?

Questions and answers

Related Manuals for IBASE Technology SI-663-N

Summary of Contents for IBASE Technology SI-663-N

  • Page 1 SI-663-N 12th Gen Intel® Core™ Processor Fanless Signage Player with HDMI / DP / DVI-D User’s Manual Version 1.0 (May 2024)
  • Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
  • Page 3 0.1% by weight (1000 ppm) except for cadmium, limited to 0.01% by weight (100 ppm). • Lead (Pb) • Mercury (Hg) • Cadmium (Cd) • Hexavalent chromium (Cr6+) • Polybrominated biphenyls (PBB) • Polybrominated diphenyl ether (PBDE) SI-663-N User’s Manual...
  • Page 4 Avoid Disassembly Do not disassemble, repair or make any modification to the device. Doing so could generate hazards and cause damage to the device, even bodily injury or property damage, and will void any warranty. SI-663-N User’s Manual...
  • Page 5 Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, visit the eRMA page in the IBASE’s website and follow the instructions to obtain RMA authorization or contact your distributor / sales representative for assistance. SI-663-N User’s Manual...

  • Page 6: Table Of Contents

    2.4.17 Front Panel Connector (JP2) ..........29 2.4.18 DDR5 SO-DIMM Slot (J5 / J13) ..........30 2.4.19 80 Port Debug (J8) ..............31 2.4.20 M.2 M2280 Slot (J3) ............... 31 2.4.21 M.2 E2230 Slot (J12) .............. 32 SI-663-N User’s Manual...
  • Page 7 Advanced Settings ................49 Chipset Settings ..................61 Security Settings ................... 65 Boot Settings..................67 Save & Exit Settings................68 MEBx ....................69 Appendix ...................... 70 I/O Port Address Map ................71 Interrupt Request Lines (IRQ) ............... 74 SI-663-N User’s Manual...

  • Page 9: Chapter 1 General Information

    Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Accessories • Specifications • Product View • Dimensions...

  • Page 10: Introduction

    1.1 Introduction Introducing the SI-663-N, a cutting-edge 12th Gen Intel® Core™ Processor Fanless Signage Player from IBASE. Equipped with Intel® SoC Integrated Graphics, this powerhouse boasts unrivaled performance for dynamic signage applications. Featuring iSMART intelligent energy-saving technology, it facilitates seamless power on/off scheduling and power resume functions, ensuring optimal energy efficiency.

  • Page 11: Packing List

    Your product package should include the items listed below. If any of the items below is missing, contact the distributor or the dealer from whom you purchased the product. • SI-663-N Digital Signage Player • Power Adapter • Power Cord 1.4 Specifications...
  • Page 12 Note: The product performance relies on the system functioning as a whole. The level of CPU/APU/GPU processor, the interaction among the processor and the memory and storage bandwidth, or the functionality of the digital signage application software may affect the product performance. SI-663-N User’s Manual...

  • Page 13: Product View

    Function Function DC-in Connector Power Button USB Ports Power LED Extension Power Button COM Port Antenna Holes HDD Status LED Rear View Function Function Line-in and Line-out DP Port DVI-D Port LAN Port HDMI Port Antenna Holes SI-663-N User’s Manual...
  • Page 14 Oblique View SI-663-N User’s Manual...

  • Page 15: Dimensions

    General Information 1.6 Dimensions Unit: mm SI-663-N User’s Manual...

  • Page 16: Hardware Installation & Motherboard Information

    Chapter 2 Hardware Installation & Motherboard Information The information provided in this chapter includes: • Installation /Replacement • Jumpers and Connectors...

  • Page 17: Installation / Replacement

    Hardware Configuration 2.1 Installation / Replacement The following pictures show how to disassemble the SI-663-N. 1. Remove the bracket screws and then the cover plate screws as shown below. SI-663-N User’s Manual...
  • Page 18 2. Remove the side plate by releasing the screws and chassis-side brackets shown below. SI-663-N User’s Manual...
  • Page 19 Hardware Configuration 3. Remove the I/O connector cover plates by releasing the five (5) screws shown below. 4. Separate the system board from the base heat sink by releasing the seven (7) screws shown below. SI-663-N User’s Manual...

  • Page 20: Memory

    2. Gently push the module in an upright position until the clips of the slot close to hold the module in place when the module touches the bottom of the slot. 3. To remove the module, press the ejector tabs outwards with your fingertips to eject the module. SI-663-N User’s Manual...

  • Page 21: Mini-Pcie & M.2 Cards

    1. Thread and fasten the hex nut and the 2. Apply adhesive around here. washer. Then install the antenna. Info: The diameter of the nut is around 6.35 mm (0.25”-36UNC). SI-663-N User’s Manual...

  • Page 22: Setting The Jumpers

    2.2 Setting the Jumpers Set up and configure your SI-663-N by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. 2.2.1 How to Set Jumpers Jumpers are short-length conductors consisting of several metal pins with a non-conductive base mounted on the circuit board.

  • Page 23: Motherboard Dimensions

    Hardware Configuration 2.3 Motherboard Dimensions Motherboard: MBD663 SI-663-N User’s Manual...

  • Page 24: Jumper & Connector Locations

    2.4 Jumper & Connector Locations Motherboard: MBD663 SI-663-N User’s Manual...

  • Page 25: Jumper Quick Reference

    Jumper Quick Reference Jumper Function Sierra EM919x 5G card USB/PCIe Select Clear ME Clear CMOS AT/ATX Select Flash Descriptor Security Override PWM Programming 2.4.2 Sierra EM9191 5G Card USB/PCIe Select (JP1) Function Pin closed Illustration PCIe (default) SI-663-N User’s Manual...

  • Page 26: Clear Me Contents (Jp3)

    2.4.3 Clear ME Contents (JP3) Function Pin closed Illustration Normal(default) Clear ME SI-663-N User’s Manual...

  • Page 27: Clear Cmos Contents (Jp4)

    Hardware Configuration 2.4.4 Clear CMOS Contents (JP4) Function Pin closed Illustration Normal(default) Clear CMOS SI-663-N User’s Manual...

  • Page 28: Atx & At Power Mode Selection (Jp5)

    2.4.5 ATX & AT Power Mode Selection (JP5) Function Pin closed Illustration (default) SI-663-N User’s Manual...

  • Page 29: Flash Descriptor Security Override(J6)

    Hardware Configuration 2.4.6 Flash Descriptor Security Override(J6) Flash Descriptor Illustration Security Override Disabled (default) Open Enabled Close Note: J6 is for factory use only. SI-663-N User’s Manual...

  • Page 30: Pwm Programming (J7)

    2.4.7 PWM Programming (J7) Note: J7 is for factory use only. SI-663-N User’s Manual...

  • Page 31: Connector Quick Reference

    DDR5 SO-DIMM Slots SPI Flash Connector (Factory use only) 80 Port Debug (Factory use only) J3, J12 M.2 M2280 Slots SIM Slot M.2 E2230 Slot Front Panel Connector SW1, J10 Power Buttom CPU_FAN1, SYS_FAN1 Fan Power Connectors SI-663-N User’s Manual...

  • Page 32: Gigabit Lan (Intel I226-Lm) (Cn1)

    2.4.9 2.5 Gigabit LAN (Intel I226-LM) (CN1) 2.4.10 DisplayPort (CN2) SI-663-N User’s Manual...

  • Page 33: Hdmi Connector (Cn3)

    Hardware Configuration 2.4.11 HDMI Connector (CN3) 2.4.12 DVI-D Connector (CN4) SI-663-N User’s Manual...

  • Page 34: Dc_In Connector (Cn5)

    2.4.13 DC_IN Connector (CN5) 2.4.14 USB 3.2 Connector (CN6, CN7, CN8) SI-663-N User’s Manual...

  • Page 35: Usb 2.0 Connector (Cn9)

    Hardware Configuration 2.4.15 USB 2.0 Connector (CN9) SI-663-N User’s Manual...

  • Page 36: Com1 Ports (Cn10)

    COM1 Ports (CN10) Signal Name Signal Name DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground SI-663-N User’s Manual...

  • Page 37: Front Panel Connector (Jp2)

    Orientation is not required when making a connection to this header. Power LED (Pins 7 and 8) This connector connects to the system power LED on control panel. This LED will light when the system turns on. SI-663-N User’s Manual...

  • Page 38: Ddr5 So-Dimm Slot (J5 / J13)

    2.4.18 DDR5 SO-DIMM Slot (J5 / J13) SI-663-N User’s Manual...

  • Page 39: Port Debug (J8)

    Hardware Configuration 2.4.19 80 Port Debug (J8) Note: J8 is for factory use only. 2.4.20 M.2 M2280 Slot (J3) *J3/J12 supports NVME SI-663-N User’s Manual...

  • Page 40: E2230 Slot (J12)

    2.4.21 M.2 E2230 Slot (J12) *J12 * supports USB2.0 & PCIE x1 2.4.22 SPI Flash Connector (J11) Note: J11 is for factory use only. SI-663-N User’s Manual...

  • Page 41: Sim Slot (J15)

    Hardware Configuration 2.4.23 SIM Slot (J15) 2.4.24 M.2 B-key 3052 Slot (J14) *J14 supports Sierra EM9191 5G modules. SI-663-N User’s Manual...

  • Page 42: Fan Power Connectors (Cpu_Fan1, Sys_Fan1)

    2.4.25 Fan Power Connectors (CPU_FAN1, SYS_FAN1) Signal Name Ground +12V Rotation detection Control SI-663-N User’s Manual...

  • Page 43: Chapter 3 Driver Installation

    Chapter 3 Driver Installation The information provided in this chapter includes: ◼ Intel® Chipset Software Installation Utility ◼ HD Audio Driver Installation ◼ LAN Driver Installation ◼ Intel® Management Engine Components Drivers Installation...

  • Page 44: Introduction

    Chipset Device Software appears, click Next to continue. 3. Accept the software license agreement. 4. On the Readme File Information screen, click Install. 5. After the installation has been completed, click Finish to complete the setup process. SI-663-N User’s Manual...

  • Page 45: Vga Driver Installation

    Run the drivers disk. Click Intel on the left pane and then Intel(R) AlderLake-P/PS/U Chipset Drivers, and Intel(R) HD Graphics Driver on the right pane. 2. When the Intel Graphics Driver Installer screen appears, click Begin installation. SI-663-N User’s Manual...
  • Page 46 Click Start to start installing the new graphics driver. 5. The next screen will indicate that the new graphics driver is being installed. When the message “Installation complete!” appears, restart your system in order to apply the driver changes. SI-663-N User’s Manual...

  • Page 47: Realtek Hd Audio Driver Installation

    3.4 Realtek HD Audio Driver Installation 1. Before installing the audio drivers in the disk provided, run the batch file - Intel_Sound.bat in the directory shown in the picture below: I-12_Gen-P-1.0\Intel\AlderLake-P\Sound\Windows 10_11 Right-click Intel_Sound.bat and run the batch file as administrator. SI-663-N User’s Manual...
  • Page 48 Chipset Drivers, and Realtek High Definition Audio Driver on the right pane. 3. On the Welcome screen of the InstallShield Wizard, click Next to install the drivers. 4. When the audio driver has been installed, click Finish to restart the computer. SI-663-N User’s Manual...

  • Page 49: Lan Drivers Installation

    1. Run the disk enclosed with the board package. Click Intel on the left pane and then Intel(R) AlderLake-P/PS/U Chipset Drivers, and Intel PRO LAN Network Drivers on the right pane. 2. Click Intel Drivers and Software. SI-663-N User’s Manual...
  • Page 50 4. On the Setup Options screen, select the program features you want to be installed. Then click Next to continue. 5. On the Ready to Install the Program screen, click Install to begin the installation. When the Install wizard Completed screen appears, click Finish. SI-663-N User’s Manual...

  • Page 51: Intel Management Engine Components Drivers Installation

    Drivers on the right pane.. 2. When the Welcome screen appears, click Next. 3. Accept the license agreement and click Next. 4. On the Destination Folder screen, click Next. 5. After Intel Management Engine Components have been successfully installed, click Finish. SI-663-N User’s Manual...

  • Page 52: Intel® Serial I/O Drivers Installation

    2. When the Welcome screen to the Intel® Serial IO appears, click Next. 3. Accept the terms in the license agreement and click Next. 4. On the Readme File Information and Confirmation screens, click Next. 5. Click Finish when the Completion screen appears. SI-663-N User’s Manual...

  • Page 53: Intel® Thunderbolt Drivers Installation

    1. Run the disk enclosed with the board package. Click Intel on the left pane and then Intel(R) AlderLake-P/PS/U Chipset Drivers, and Intel(R) Thunderbolt Drivers on the right pane. 2. Accept the terms in the license agreement and click Install. SI-663-N User’s Manual...
  • Page 54 3. When installation has been completed, click Restart. SI-663-N User’s Manual...

  • Page 55: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •...

  • Page 56: Introduction

    These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. SI-663-N User’s Manual...

  • Page 57: Main Settings

    System Time Use the <Tab> key to switch between the time elements. 4.4 Advanced Settings This section allows you to configure, improve your system and allows you to set up some system features according to your preference. SI-663-N User’s Manual...
  • Page 58 Number of cores to enable in each processor package. Number of Core and Active Procesor Cores E-cores are looked at together. When both are [0,0], Pcode will enable all cores. Enable or Disable Hyper-Threading Hyper-Threading Technology Enable/Disable AES (Advanced Encryption Standard) SI-663-N User’s Manual...
  • Page 59 Enabling will expose the CPPC V2 Technology interface to allow for hardware controlled P-states. Enable/Disable processor Tubo mode (requires Tubo Mode EMTTM enabled too). AUTO means enabled. Config TDP Configurable processor base power (cTDP) Configuration configuration SI-663-N User’s Manual...
  • Page 60 4.4.3 PCH-FW Configuration SI-663-N User’s Manual...
  • Page 61 2.0 will restrict support to TPM 2.0 devices. Device Select Auto will support both with the default set to TPM 2.0 devices. If not found, TPM 1.2 devices will be enumerated. Overried to allow SID authentication in TCG storage Disable Block Sid device. SI-663-N User’s Manual...
  • Page 62 Enables / Disables system ability to hibernate Enable Hibernation (OS/S4 Sleep State). This option may not be effective with some operating systems. Select the highest ACPI sleep state the ACPI Sleep State system will enter when the SUSPEND button is pressed. SI-663-N User’s Manual...
  • Page 63 For example, if setting up a schedule from Wednesday 5 p.m. to Thursday 2 a.m., configure two schedule slots. But if setting up a schedule from 3 p.m to 5 p.m. on Wednesday, configure only a schedule slot. SI-663-N User’s Manual...
  • Page 64 F81804 Super IO Configuration BIOS Setting Description Serial Port 1 Configuration Sets parameters of Serial Port 1 (COMA). Serial Port Enable / Disable the serial port. Select an optimal setting for the Super IO Change Settings device. SI-663-N User’s Manual...
  • Page 65 Temperatures / Voltages motherboard. The values are read-only values as monitored by the system and show the PC health status. CPU Smart Fan Function Smart Fan Mode Select SYS Smart Fan Function SI-663-N User’s Manual...
  • Page 66 The maximum time the device will take before it properly reports itself to the Host Controller. “Auto” uses default value for a Root port it is Device power-up delay 100ms. But for a Hub port, the delay is taken from Hub descriptor. SI-663-N User’s Manual...
  • Page 67 BIOS Setup 4.4.10 Network Stack Configuration BIOS Setting Description Network Stack Enables / Disables UEFI Network Stack. SI-663-N User’s Manual...
  • Page 68 4.4.11 NVMe Configuration SI-663-N User’s Manual...

  • Page 69: Chipset Settings

    BIOS Setup 4.5 Chipset Settings BIOS Setting Description System Agent (SA) Configuration System Agent (SA) parameters PCH-IO Configuration PCH parameters SI-663-N User’s Manual...
  • Page 70 4.5.1 System Agent (SA) Configuration BIOS Setting Description System Agent (SA) System Agent (SA) Parameters Configuration Graphics Configuration Configures the graphics settings. VT-d Checks if VT-d function on MCH is supported. SI-663-N User’s Manual...
  • Page 71 2048 MB aperture. To use this feature, disable CSM support. PSMI Support Options: Enable / Disable DVMT Pre- Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Allocated Memory size used by the internal graphics device. SI-663-N User’s Manual...
  • Page 72 Configures SATA devices. Configuration 4.5.2.1. SATA Configuration: BIOS Setting Description SATA Controller(s) Enables / Disables the SATA device. Serial ATA Ports Enables / Disables serial ports. SATA Ports Hot Plug Enables / Disables SATA Ports Hot Plug. SI-663-N User’s Manual...

  • Page 73: Security Settings

    BIOS Setup 4.6 Security Settings BIOS Setting Description Administrator Sets an administrator password for the setup utility. Password User Password Sets a user password. Secure Boot Configures Secure Boot. SI-663-N User’s Manual...
  • Page 74 Restore Factory Forces system to user mode. Install factory default Keys Secure Boot key databases. Enables expert users to modify Secure Boot Policy Management variables without full authentication. SI-663-N User’s Manual...

  • Page 75: Boot Settings

    Selects the keyboard NumLock state. NumLock State Quiet Boot Enables / Disables Quiet Boot option. Boot Option Sets the system boot order. Priorities UEFI NVME Specifies the boot device priority sequence from available Drive BBS UEFI NVME drives. Priorities SI-663-N User’s Manual...

  • Page 76: Save & Exit Settings

    Restores / Loads defaults values for all the setup Restore Defaults options. Save as User Saves the changes done so far as User Defaults. Defaults Restore User Restores the user defaults to all the setup options. Defaults SI-663-N User’s Manual...

  • Page 77: Mebx

    BIOS Setup 4.9 MEBx SI-663-N User’s Manual...

  • Page 78: Appendix

    Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ)

  • Page 79: I/O Port Address Map

    Motherboard resources 0x0000164E-0x0000164F Motherboard resources 0x00000800-0x0000087F Motherboard resources 0x000000F0-0x000000F0 Numeric data processor 0x0000F050-0x0000F057 Standard SATA AHCI Controller 0x0000F040-0x0000F043 Standard SATA AHCI Controller 0x0000F020-0x0000F03F Standard SATA AHCI Controller 0x000003F8-0x000003FF Communications Port (COM1) 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer SI-663-N User’s Manual...
  • Page 80 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B2-0x000000B3 Motherboard resources 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000002F8-0x000002FF Communication Port (COM2) 0x000003F8-0x000003FF Communication Port (COM1) 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000680-0x0000069F Motherboard resources 0x00000A00-0x00000A0F Motherboard resources SI-663-N User’s Manual...
  • Page 81 Intel(R) Iris (R) Xe Graphics 0x00004060-0x0000407F Standard SATA AHCI Controller 0x00004080-0x00004083 Standard SATA AHCI Controller 0x00004090-0x00004097 Standard SATA AHCI Controller 0x00004060-0x0000407F Standard SATA AHCI Controller Intel(R) SMBus – A0A3 0x0000EFA0-0x0000EFBF Intel(R) Active Management Technology 0x0000FFF8-0x0000FFFF SOL (COM3) SI-663-N User’s Manual...

  • Page 82: Interrupt Request Lines (Irq)

    Intel(R) Iris (R) Xe Graphics Intel(R) USB 3.10 eXtensible Host Controller - 1.20 IRQ 4294967287~88 (Microsoft) Intel(R) PCI Express Root Port #7 – A0Be IRQ 4294967289 IRQ 4294967289 Intel(R) Management Engine Interface IRQ 4294967291~94 PCI Express Root Port SI-663-N User’s Manual...

Table of Contents