1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Digital Signage
  5. SI-60E-M
  6. User manual

IBASE Technology SI-60E-M User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SI-60E User Manual
1
SI-60E
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SI-60E-M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IBASE Technology SI-60E-M

Summary of Contents for IBASE Technology SI-60E-M

  • Page 1 SI-60E User Manual SI-60E User Manual...
  • Page 2 Revision Release Date V1.0 2015/06/23 V1.1 2015/09/08 V1.2 2015/10/20 V1.3 2016/04/26 V1.4 2017/08/04...
  • Page 3 Copyright © 2013 IBASE Technology Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of IBASE Technology INC.

  • Page 4: Table Of Contents

    Table of Contents Setting up your system ......................5 Care during use ........................6 Acknowledgments ........................7 CHAPTER 1 INTRODUCTION ................... 8 1.1 General Description ......................8 1.2 System Specifications ...................... 9 1.2.1 Hardware Specifications ....................9 1.2.2 Dimensions ........................10 1.2.3 I/O View ...........................

  • Page 5: Setting Up Your System

    Safety Information Your SI-60E is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions Setting up your system • Read and follow all instructions in the documentation before you operate your system.

  • Page 6: Care During Use

    Care during use • Do not walk on the power cord or allow anything to rest on it. • Do not spill water or any other liquids on your system. • When the system is turned off, a small amount of electrical current still flows. Always unplug all power, and network cables from the power outlets before cleaning the system.

  • Page 7: Acknowledgments

    Acknowledgments • AMI is a registered trademark of AMI Software International, Inc. • AMD and ATI are registered trademarks of AMD Corporation. • Intel, Pentium, and Intel Core are registered trademarks or trademarks of Intel Corporation. • Microsoft Windows is a registered trademark of Microsoft Corporation. •...

  • Page 8: Chapter 1 Introduction

    • CHAPTER 1 INTRODUCTION 1.1 General Description The “Signature Book™” SI-60E is a professional digital signage system powered I Desktop Processors with AMD Radeon™ E8860 graphics. ® by 4 Gen. Intel Core The SI-60E integrates 12 HDMI ports with EDID emulation function and one DVI-I for console use.

  • Page 9: System Specifications

    1.2 System Specifications 1.2.1 Hardware Specifications Model Name SI-60E System Mainboard MBD60E 4th Generation Intel® Core™ i7/i5/i3 and Pentium® QC/DC processors; Up to 3.5GHz Memory 4x DDR3 1600 MHz, Max. 32GB I/O Interface 12x HDMI with EDID emulation function 1x DVI-I for console 4x USB 3.0 ports 2x RJ45 for Gigabit LAN 1x DSUB 9 pin for RS-232/422/485...

  • Page 10: Dimensions

    1.2.2 Dimensions...

  • Page 11: I/O View

    1.2.3 I/O View SI-60E front side SI-60E rear side...

  • Page 12: Exploded View Of The Si-60E Assembly

    1.3 Exploded View of the SI-60E Assembly...

  • Page 13: Parts Description

    1.3.1 Parts Description Part No. Description Part No. Description SI-60E_BASE 4028_fan HDMI Board Module Power module SI-60E Main Board SI-60E_HDD-TRAY SI-60E_HDD-BRK Screw F Type M3*0.5 SATA Cable 2.5" SATA HDD M3 nut M3 double screw bolt SI-60E_top-cover_L SI-60E_top-cover_r Screw PW Type M3*0.5 M3 screw Screw F Type M3*0.5 BK...

  • Page 14: Packing List

    1.4 Packing List Description Driver CD Power cord 1.4.1 Optional Items module WiFi Solution Description Wireless; PCI-E Mini Card 802.11B/G/N [AW-NE238H] WiFi module (A008WLAWNE238H000P) External Antenna 2pcs WiFi Antenna (A055RFA02C2M20800P) Internal Antenna 300mm [BTC130-1-70B-300] RoHS Internal cable 1pcs (A055RFA0000020100P) Internal Antenna 200mm [BTC130-1-70B-200-1] RoHS Internal cable 1pcs (A055RFA0000020000P) Screw;...

  • Page 15: Hardware Installation

    1.5 HARDWARE INSTALLATION 1.5.1 Mounting Installation 1. Please install SI-60E to its intended location using 4x M4*0.7*6L screws, as shown in the picture.

  • Page 16: Installing The Storage

    1.5.2 Installing the storage 1. Remove the two screws on the HDD cover and draw the HDD out. 2. Install the HDD/SSD to the HDD bracket with 4 screws.

  • Page 17: Installing The Rackmount

    1.5.3 Installing the Rackmount 1. Please install SI-60E to its intended location using 12x M3 screws, as shown in the picture...

  • Page 18: Chapter 2 Motherboard Introduction

    CHAPTER 2 MOTHERBOARD INTRODUCTION 2.1 Introduction MBD60E Jumpers and Connectors...
  • Page 19 MBD60E Board Dimensions...

  • Page 20: Installations

    2.2 Installations 2.2.1 Installing the Memory The MBD60E board supports four DDR3 memory modules for a maximum total of 32GB in DDR3 SODIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1.

  • Page 21: Setting The Jumpers

    2.3 Setting the Jumpers Jumpers are used on MBD60E to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the jumpers and connectors on MBD60E and their respective functions.
  • Page 22 JP2: COM1 RS232 RI/+5V/+12V Power Setting Setting Function Pin 1-3 +12V Short/Closed Pin 3-4 Short/Closed Pin 5-3 Short/Closed JP3: Flash Descriptor Security Override (Factory use only)

  • Page 23: Connectors On Mbd60E

    2.4 Connectors on MBD60E J1: COM2 Connector [HRS DF11-10DP-2DSA(08)] Signal Name Signal Name Pin # Pin # Data carrier detect Receive data Transmit data Data terminal ready Ground Data set ready Request to send Clear to send Ring indicator Not Used J2: ATX +12V Jack [HAOGUO ATX4PT-NY46] Pin # Signal Name Ground...
  • Page 24 J4, J5, J6, J7 DDR III Socket J8: MCU Flash Connector (Factory use only) J9: Debug Port Connector (Factory use only) J10: Reset Pin Header J11: Mini PCIe Slot (Full size with SIM Card)
  • Page 25 J12: Mini PCIe Slot (Full size with mSATA) J13: ATX Power Supply Connector Signal Name Pin # Pin # Signal Name 3.3V 3.3V -12V 3.3V Ground Ground PS-ON Ground Ground Ground Ground Ground Power good 5VSB +12V +12V Ground +3.3V J14: SIM Card Slot...
  • Page 26 CN1: COM1 / DVI-I Connector Signals of COM1 Connector: Signal Name Pin # RS-232 R2-422 RS-485 DATA- DATA+ Ground Ground Ground CN2: Audio Jack CN3: RTL8111G-CG /USB3.0 Connector...
  • Page 27 CN4: I218LM / USB3.0 Connector CN5/6:SATA 3 Connector CPU_FAN1: CPU Fan Power Connector Pin # Signal Name Ground +12V Rotation detection Control GPU_FAN1: GPU Fan Power Connector Pin # Signal Name Ground +12V Rotation detection Control...
  • Page 28 SYS_FAN1: System Fan1 Power Connector Pin # Signal Name Ground +12V Rotation detection SW1: Power On Button LED1: PWR (Green)/ HDD LED (Red) PCIE1, PCIE2, PCIE3: DP Signal from AMD E8860 to IDD100...

  • Page 29: Chapter 3 Bios Setup

    CHAPTER 3 BIOS SETUP This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: 3.1 BIOS Introduction The BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel processors.
  • Page 30 Main Settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit System Language [English] → ←Select Screen ↑↓Select Item System Date [Tue Enter: Select +- Change Opt. 01/20/2009] System Time F1: General Help F2: Previous Values [21:52:06] F3: Optimized Defaults...
  • Page 31 Advanced Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...
  • Page 32 ACPI Settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit → ←Select Screen ACPI Settings ↑↓Select Item Enter: Select +- Change Opt. S3 only (Suspend to …) ACPI Sleep State F1: General Help F2: Previous Values Lock Legacy Resources...
  • Page 33 Trusted Computing Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Configuration → ←Select Screen ↑↓Select Item Security Device Support Disabled Enter: Select +- Change Opt. F1: General Help Current Status Information F2: Previous Values F3: Optimized Defaults SUPPORT TURNED OFF...
  • Page 34 Wake up event settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit → ←Select Screen ↑↓Select Item Wake on PCIE Wake Event Disabled Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 35 CPU Configuration This section shows the CPU configuration parameters. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit CPU Configuration Intel(R) Core(TM) i7-4770S CPU @ 3.10GHz CPU Signature 306c3 Processor Family Microcode Patch FSB Speed 100 MHz...
  • Page 36 Hyper-threading Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled. Active Processor Cores Number of cores to enable in each processor package. Overclocking lock FLEX_RATIO(194) MSR Limit CPUID Maximum...
  • Page 37 SATA Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit SATA Controller(s) Enabled SATA Mode Selection AHCI SATA Controller Speed Default Serial ATA Port 0 Empty Software Preserve Unknown Port 0 Enabled Hot Plug Disabled...
  • Page 38 Shutdown Temperature Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit → ← Select Screen ↑↓Select Item APCI Shutdown Temperature Disabled Enter: Select +- Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 39 AMT Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Intel AMT Enabled BIOS Hotkey Pressed Disabled MEBx Selection Screen Disabled Hide Un-Configure ME Confirmation Disabled Un-Configure ME Disabled Amt Wait Timer Activate Remote Assistance Process Disabled USB Configure...
  • Page 40 Amt Wait Timer Set timer to wait before sending ASF_GET_BOOT_OPTIONS. Activate Remote Assistance Process Trigger CIRA boot. USB Configure Enable/Disable USB Configure function. PET Progress User can Enable/Disable PET Events progress to receive PET events or not. Watchdog Timer Enable/Disable Watchdog Timer. USB Configuration Aptio Setup Utility –...
  • Page 41 Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. USB3.0 Support Enable/Disable USB3.0 (XHCI) Controller support. XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.
  • Page 42 F81846 Super IO Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit F81846 Super IO Configuration → ← Select Screen F81846 Super IO Chip F81846 ↑↓Select Item ► Serial Port 0 Configuration Enter: Select +- Change Opt.
  • Page 43 F81846 H/W Monitor Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit PC Health Status CPU temperature +34 C SYS temperature +29 C FAN1 Speed 2170 RPM FAN2 Speed 2170 RPM FAN3 Speed 2170 RPM →...
  • Page 44 Chipset Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...
  • Page 45 PCI Express Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit PCI Express Configuration DMI Link ASPM Control Enabled DMI Link Extended Synch Control Disabled PCIe-USB Glitch W/A Disabled Subtractive Decode Disabled ►...
  • Page 46 USB Configuration Main Advanced Chipset Boot Security Save & Exit USB Configuration → ←Select Screen ↑↓Select Item USB Precondition Disabled Enter: Select +- Change Opt. xHCI Mode Auto F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit USB Ports Per-Port Disable Control Disabled ESC: Exit...
  • Page 47 System Agent (SA) Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit System Agent Bridge Name Haswell System Agent RC Version 1.8.0.0 VT-d Capability Supported → ← Select Screen ↑↓Select Item Enter: Select VT-d Enabled...
  • Page 48 Primary Display Select which of IGFX/PEG/PCI graphics device should be Primary Display or select SG for switchable Gfx. Primary PEG Select PEG0/PEG1/PEG2/PEG3 Graphics device should be Primary PEG. Primary PCIE Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6PCIE7 Graphics device should be Primary PCIE. Internal Graphics Keep IGD enabled based on the setup options.
  • Page 49 Boot Settings This section allows you to configure the boot settings. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Setup Prompt Timeout Bootup NumLock State Quiet Boot Disabled Fast Boot Disabled Boot Mode select...
  • Page 50 CSM parameters This section allows you to configure the boot settings. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Launch CSM Enabled Boot option filter UEFI and Legacy → ← Select Screen Launch PXE OpROM policy Do not launch...
  • Page 51 Security Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &...
  • Page 52 Save & Exit Settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Options →...

  • Page 53: Chapter 4 Drivers Installation

    CHAPTER 4 DRIVERS INSTALLATION The Intel Chipset Drivers should be installed first before the software drivers to enable Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation. IMPORTANT NOTE: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the drivers installation.
  • Page 54 3. When the Welcome screen to the Intel® Chipset Device Software appears, click Next to continue. 4. Click Accept to accept the software license agreement and proceed with the installation process.
  • Page 55 5. On the Readme File Information screen, click Install to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect.

  • Page 56: Amd Radeon E8860 Graphics Driver

    4.2 AMD Radeon E8860 Graphics Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click AMD Radeon E8860 Graphics Driver. 2. When the Welcome screen appears, click Next to continue. 3. Select the language you would like to be displayed and click Next.
  • Page 57 4. Click Install to continue the installation process. 5. Select Express and the installation location and click Next.
  • Page 58 6. Click Accept to accept the End User License Agreement.
  • Page 59 7. Setup complete. Click Finish to restart the computer and for changes to take effect. 8. To reboot the system, click Yes.

  • Page 60: Realtek High Definition Audio Driver

    4.3 Realtek High Definition Audio Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. 2. Click Realtek High Definition Audio Driver.
  • Page 61 3. On the Welcome to the InstallShield Wizard screen, click Yes to proceed with and complete the installation process. 4. The InstallShield Wizard Complete. Click Finish to restart the computer and for changes to take effect.

  • Page 62: Intel® I21X Gigabit Network Driver

    4.4 Intel® I21x Gigabit Network Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. 2. Click Intel® I21x Gigabit Network Driver.
  • Page 63 3. When the Welcome screen appears, click Next. 4. Click Next to to agree with the license agreement.
  • Page 64 5. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue. 6. The wizard is ready to begin installation. Click Install to begin the installation.
  • Page 65 7. When InstallShield Wizard is complete, click Finish.

  • Page 66: Intel® Management Engine(Me) Driver

    4.5 Intel® Management Engine(ME) Driver Follow the steps below to install the Intel Management Engine. 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products.and then Intel® Management Engine(ME) Driver. 2. When the Welcome screen for Intel® Management Engine Components, click the checkbox for Install Intel®...
  • Page 67 3. Click Yes to to agree with the license agreement. 4. When the Setup Progress screen appears, click Next. Then, click Finish when the setup progress has been successfully installed.

  • Page 69: Intel® Usb 3.0 Extensible Host Controller Driver

    4.6 Intel® USB 3.0 eXtensible Host Controller Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click Intel® USB 3.0 eXtensible Host Controller Driver. 2. When the Welcome screen to the InstallShield Wizard for Intel® USB 3.0 eXtensible Host Controller Driver, click Next.
  • Page 70 3. Click Yes to to agree with the license agreement and continue the installation. 4. On the Readme File Information screen, click Next to continue the installation of the Intel® USB 3.0 eXtensible Host Controller Driver.
  • Page 71 5. Setup complete. Click Finish to restart the computer and for changes to take effect.

  • Page 72: Realtek Rtl8111G Lan Driver

    4.7 Realtek RTL8111G LAN Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click Realtek RTL8111G LAN Driver. 2. In the Welcome screen, click Next.
  • Page 73 3. When the Ready to Install the Program screen appears, click Install to continue. 4. When InstallShield Wizard is complete, click Finish.

  • Page 74: Idd100 Driver And Utility

    4.8 IDD100 Driver and Utility 1.Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click IDD100 Driver and Utility. 2. Click CP210x Installer...
  • Page 75 3. In the Welcome screen, click Next. 4. When the License Agreement the Program screen appears, click I accept this agreement and Next.
  • Page 76 5.When complete the Installation of the CP210x USB to UART Bridge Driver, click Finish. 6.Click SI-60E Installer.
  • Page 77 7. In the Welcome screen, click Next. 8. When the Destination Folder screen appears, click Next.
  • Page 78 9. When the Ready to Install the Program screen appears, click Install. 10.When InstallShield Wizard Complete, click Finish.

  • Page 79: Appendix

    Appendix A. IBASE Display Matrix User Manual Software UART Control Application interface Function Description Device List: Max support up to 6 Box Auto Loop Pattern (Button/Hot Key) RGBW Pattern (Button/Hot Key) HW RESET (Button/Hot Key) MODE Clone/1x2/1x4/2x2 Support CLK SYNC Support 60Hz/120Hz Modes Support Multi-Box ID Support Multi-Box Device Setting...
  • Page 80 Display Mode Table Stretch (1x2) Stretch (1x4) Stretch (2x2) Clone 3840x1200 7680x1200 3840x2400 1920x1200 3840x1080 7680x1080 3840x2160 1920x1080 3360x1050 6720x1050 3360x2100 1680x1050 3200x1200 6400x1200 3200x2400 1600x1200 3200x0900 6400x0900 3200x1800 1600x0900 2880x1050 5760x1050 2880x2160 1440x1050 2880x0900 5760x0900 2880x1800 1440x0900 2800x1050 5600x1050 2800x2100 1400x1050 2732x0768...
  • Page 81 How to Setting 1x4 Display Step 1: Enter to Display Control Page Step 2: Go to Mode Status Press Enter Step 3: Press Up / Down Key Select to Stretch Step 4: Go to Display Layout to Select 1x4 Step 5: Go to UP or DOWN Port select a Display Resolution Step 6: Go to Display Driver Control Page Step 7: Setting the two Monitor to H Combine Condition Step 8: Adjustment H Bezel...

  • Page 82: Setting

    B. IBASE Multiple-Display Matrix Technology Utility for 4 x 3 Video Wall Display configuration setting 1.1 What is ATI Eyefinity Technology? ATI Eyefinity Technology from AMD provides advanced multiple monitor technology delivering an incredibly immersive graphic and computing experience with innovative display capabilities, supporting massive desktop workspaces and super-high resolution signage applications.
  • Page 83 1.2 Product Description IBASE offers user-friendly and powerful video solution in the form of SI-60E (Signature Book) with IBASE Multiple-Display Matrix Technology Utility & AMD Eyefinity function. Each IBASE SI-60E (Signature Book) with IBASE Multiple-Display Matrix Technology Utility & Eyefinity function can drive up to 12 displays with different display configuration.
  • Page 84 1.3 SI-60E HDMI output and Display distribution Before you would like to set up the VW display configuration, please plug display HDMI cable with SI-60E as following photo.
  • Page 85 1.4 Driver Installation Before using SI-60E (Signature Book)’s IBASE Multiple-Display Matrix Technology Utility & AMD Eyefinity function, the user must install both SI-60E Installer V 1.0 for (CP210xVCPInstaller/ SI-60E ControlCenter) and AMD VGA driver completely. 1.4.1 IBASE Multiple-Display Matrix Technology Utility Click SI-60E Icon on the Desktop, to have Software UART Control Application interface as shown:...
  • Page 86 “Turn on” Device List...
  • Page 87 On the above Device List item, please confirm and check each IDD 100 Device with the different ID. If the Device has the same ID (the above two Device with the same ID Disable “Device Setting Sync” 2), please function, then select and click one of the same ID device, then select “Set DeviceID”...
  • Page 88 The following is an example for FHD displays. Choose “Mode” as Stretch (IDD100 Device with 4 x HDMI output as 1 x 4 combination mode). Please choose “Clock Sync” as DP1 and enable “Device Setting Sync”, then click “Apply”. 3 x IDD100 Device (Each with 4 x HDMI) will have the same setting at the same time.
  • Page 89 Now you can leave IBASE SI-60E control center V1.0 utility, and start using “AMD Catalyst Control Center”...
  • Page 90 Choose “AMD Eyefinity Multi-Display” for Video wall display configuration setting.
  • Page 91 Select “Create Eyefinity Display Group”...
  • Page 92 Select “2 x 3” for 4 x 3 Display configuration...
  • Page 93 Make the displays arrangement...
  • Page 94 Complete the settings.
  • Page 95 Now, you can use Screen resolution to check your setting. A screen with 7680 X 3240 is the correct setting for 4 x 3 Display configuration with FHD (1920 X 1080) resolution supported displays.
  • Page 96 1.4.2 8 and 12 display configuration setting A. 8 x 1 Display configuration (1) Select “1 x 4 Stretch” by control centor utility (2) Create Eyefinity Display Grou p”4 x 1” with AMD Eyefinity “4 x1” (Landscape) for 8 x 1 Display configuration with 15360 x 1200 resolution...
  • Page 97 B. 4 x 2 Display configuration (1) Select “1 x 4 Stretch” by control centor utility (2) Create Eyefinity Display Grou p”2 x 2” with AMD Eyefinity “2 x 2” (Landscape) for 4 x 2 Display configuration with 7680 x 2400 resolution...
  • Page 98 C. 6 x 2 Display configuration (1) Select “2 x 2 Stretch” by control centor utility (2) Create Eyefinity Display Grou p”3 x 2” with AMD Eyefinity “3 x 2” (Landscape) for 6 x 2 Display configuration with 11520 x 2400 resolution...
  • Page 99 D. 2 x 4 Display configuration (1) Select “2 x 2 Stretch” by control centor utility...
  • Page 100 (2) Create Eyefinity Display Grou p”1 x 4” with AMD Eyefinity “1 x 4” (Landscape) for 2 x 4 Display configuration with 3840 x 4800 resolution 2 x 4 Landscape...
  • Page 101 1.5 SI-60E Bezel adjustment for 4 x 3 Display configuration First, please do check and confirm your DP output is correct; also set SI-60E control center “Clock Sync” as “off”. Then you can start to use Bezel adjustment function. Please use AMD Eyefinity Arrangement to re-arrange the DP output, then start to do the Bezel adjustment in each DP first.
  • Page 102 After you have finished the red line area bezel adjustment, you can start to use SI-60E Control panel to do the Bezel Adjustment with “H bezel” (Yellow Line) as shown below.

  • Page 103: Idd100 Led Indicator Description

    C. IDD100 LED Indicator Description D1: Power Done D7/D6: Video ASIC FW Ready D4/D5: HDMI Port Program Ready D2/D8: DP Port 1/2 Ready, LED Flash: DP handshake fail. J1 OLED Display: FPGA Code Ready...

  • Page 104: I/O Port Address Map

    D. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address Device Description 0000h-001Fh Direct memory access controller 0000h-0CF7h PCI bus...

  • Page 105: Interrupt Request Lines (Irq)

    E. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ 5 Intel(R) 8 Series/C220 Series SMBus Controller - 8C22...

  • Page 106: Watchdog Timer Configuration

    F. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock.
  • Page 107 if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); else DisableWDT(); return 0;...
  • Page 108 //--------------------------------------------------------------------------- void EnableWDT(int interval) unsigned char bBuf; bBuf = Get_F81846_Reg(0x2B); bBuf &= (~0x20); Set_F81846_Reg(0x2B, bBuf); //Enable WDTO Set_F81846_LD(0x07); //switch to logic device 7 Set_F81846_Reg(0x30, 0x01); //enable timer bBuf = Get_F81846_Reg(0xF5); bBuf &= (~0x0F); bBuf |= 0x52; Set_F81846_Reg(0xF5, bBuf); //count mode is second Set_F81846_Reg(0xF6, interval);...
  • Page 109 Set_F81846_Reg(0xFA, bBuf); //enable WDTO output bBuf = Get_F81846_Reg(0xF5); bBuf |= 0x20; Set_F81846_Reg(0xF5, bBuf); //start counting //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81846_LD(0x07); //switch to logic device 7 bBuf = Get_F81846_Reg(0xFA); bBuf &= ~0x01; Set_F81846_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81846_Reg(0xF5); bBuf &= ~0x20;...
  • Page 110 //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. //--------------------------------------------------------------------------- #include "F81846.H" #include <dos.h>...
  • Page 111 //--------------------------------------------------------------------------- void Set_F81846_LD( unsigned char LD) Unlock_F81846(); outportb(F81846_INDEX_PORT, F81846_REG_LD); outportb(F81846_DATA_PORT, LD); Lock_F81846(); //--------------------------------------------------------------------------- void Set_F81846_Reg( unsigned char REG, unsigned char DATA) Unlock_F81846(); outportb(F81846_INDEX_PORT, REG); outportb(F81846_DATA_PORT, DATA); Lock_F81846(); //--------------------------------------------------------------------------- unsigned char Get_F81846_Reg(unsigned char REG) unsigned char Result; Unlock_F81846(); outportb(F81846_INDEX_PORT, REG); Result = inportb(F81846_DATA_PORT); Lock_F81846();...
  • Page 112 //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. //--------------------------------------------------------------------------- #ifndef __F81846_H #define __F81846_H //--------------------------------------------------------------------------- #define...

This manual is also suitable for:

Si-60eSi-60e-sc

Table of Contents