1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Digital Signage
  5. SI-60E
  6. User manual

IBASE Technology SI-60E User Manual

Professional digital signage system powered by 4th gen. intel core i desktop processors with amd radeon e8860 graphics
Hide thumbs Also See for SI-60E:
Table of Contents

Advertisement

Quick Links

Download this manual
SI-60E User Manual
SI-60E
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SI-60E and is the answer not in the manual?

Questions and answers

Related Manuals for IBASE Technology SI-60E

Summary of Contents for IBASE Technology SI-60E

  • Page 1 SI-60E User Manual SI-60E User Manual...
  • Page 2 SI-60E User Manual Revision Release Date V1.0 2015/04/28...
  • Page 3 IBASE Technology Inc. Copyright © 2013 IBASE Technology Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of IBASE Technology INC.

  • Page 4: Table Of Contents

    1.2 System Specifications...................... 2 1.2.1 Hardware Specifications ....................2 1.2.2 Dimensions ........................3 1.2.3 I/O View ........................... 4 1.3 Exploded View of the SI-60E Assembly ................5 1.3.1 Parts Description ......................6 1.4 Packing List ........................7 1.4.1 Optional Items module ....................7 1.5 HARDWARE INSTALLATION ....................

  • Page 5: Setting Up Your System

    IBASE Technology Inc. Safety Information Your SI-60E is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions Setting up your system ...

  • Page 6: Care During Use

    SI-60E User Manual Care during use  Do not walk on the power cord or allow anything to rest on it.  Do not spill water or any other liquids on your system.  When the system is turned off, a small amount of electrical current still flows.

  • Page 7: Acknowledgments

    FINTEK is a registered trademark of FINTEK Electronics Corporation.  REALTEK is a registered trademark of REALTEK Electronics Corporation.  All other product names or trademarks are properties of their respective owners. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 9: Chapter 1 Introduction

    Gen. Intel Core The SI-60E integrates 12 HDMI ports with EDID emulation function and one DVI-I for console. Additionally, SI-60E has two quad-channel DDR3L-1600 sockets to provide up to 32GB of memory. It also has dual Gigabit Ethernet, dual extended SSD drive, Intel AMT for remote control and IBASE’s iSMART green technology for power on/off...

  • Page 10: System Specifications

    SI-60E User Manual 1.2 System Specifications 1.2.1 Hardware Specifications Model Name SI-60E System Mainboard MBD60E 4th Generation Intel® Core™ i7/i5/i3 and Pentium® QC/DC processors; Up to 3.5GHz Memory 4x DDR3 1600 MHz, Max. 32GB I/O Interface 12x HDMI with EDID emulation function 1x DVI-I for console 4x USB 3.0 ports...

  • Page 11: Dimensions

    IBASE Technology Inc. 1.2.2 Dimensions Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 12: I/O View

    SI-60E User Manual 1.2.3 I/O View SI-60E front side SI-60E rear side...

  • Page 13: Exploded View Of The Si-60E Assembly

    IBASE Technology Inc. 1.3 Exploded View of the SI-60E Assembly Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 14: Parts Description

    SI-60E User Manual 1.3.1 Parts Description Part No. Description Part No. Description SI-60E_BASE 4028_fan HDMI Board Module Power module SI-60E Main Board SI-60E_HDD-TRAY SI-60E_HDD-BRK Screw F Type M3*0.5 SATA Cable 2.5" SATA HDD M3 nut M3 double screw bolt SI-60E_top-cover_L SI-60E_top-cover_r Screw PW Type M3*0.5...

  • Page 15: Packing List

    Antenna 3G [ANT0921Q2P] RoHS (A055ANT0921Q2P000P) COM Port Cable Description Cable; EXT-311 2-HD 10C 150CM; DSUB-9F => EXT-311 RJ45-10M RoHS (C501EXT3110A12000P) Cable; EXT-312 2-HD 10C 150CM; DSUB-9M => EXT-312 RJ45-10M RoHS (C501EXT3120A12000P) Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 16: Hardware Installation

    SI-60E User Manual 1.5 HARDWARE INSTALLATION 1.5.1 Mounting Installation 1. Please install SI-60E to the intended location using 4x M4*0.7*6L screws, as shown in the picture.

  • Page 17: Installing The Storage

    IBASE Technology Inc. 1.5.2 Installing the storage 1. Remove the two screws on the HDD cover and draw the HDD out. 2. Install the HDD/SSD to the HDD bracket with 4 screws. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 18: Chapter 2 Motherboard Introduction

    SI-60E User Manual CHAPTER 2 MOTHERBOARD INTRODUCTION 2.1 Introduction MBD60E Jumpers and Connectors...
  • Page 19 IBASE Technology Inc. IMBD60E Board Dimensions Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 20: Installations

    SI-60E User Manual 2.2 Installations 2.2.1 Installing the Memory The MBD60E board supports four DDR3 memory modules for a maximum total of 32GB in DDR3 SODIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1.

  • Page 21: Setting The Jumpers

    JBAT1: Clear CMOS Contents JBAT1 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed JP1: COM2 RS232 RI/+5V/+12V Power Setting Setting Function Pin 1-3 +12V Short/Closed Pin 3-4 Short/Closed Pin 5-3 Short/Closed Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 22 SI-60E User Manual JP2: COM1 RS232 RI/+5V/+12V Power Setting Setting Function Pin 1-3 +12V Short/Closed Pin 3-4 Short/Closed Pin 5-3 Short/Closed JP3: Flash Descriptor Security Override (Factory use only)

  • Page 23: Connectors On Mbd60E

    Request to send Clear to send Ring indicator Not Used J2: ATX +12V Jack [HAOGUO ATX4PT-NY46] Pin # Signal Name Ground Ground DC_IN DC_IN J3: For SPI Debug tools Pin Header Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 24 SI-60E User Manual J4, J5, J6, J7 DDR III Socket J8: MCU Flash Connector (factory use only) J9: Debug Port Connector (Factory use only) J10: Reset Pin Header J11: Mini PCIe Slot (Full size with SIM Card)
  • Page 25 Signal Name Pin # Pin # Signal Name 3.3V 3.3V -12V 3.3V Ground Ground PS-ON Ground Ground Ground Ground Ground Power good 5VSB +12V +12V Ground +3.3V J14: SIM Card Slot Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 26 SI-60E User Manual CN1: COM1 / DVI-I Connector CN2: Audio Jack CN3: RTL8111G-CG /USB3.0 Connector CN4: I218LM / USB3.0 Connector CN5/6:SATA 3 Connector...
  • Page 27 +12V Rotation detection Control GPU_FAN1: GPU Fan Power Connector Pin # Signal Name Ground +12V Rotation detection Control SYS_FAN1: System Fan1 Power Connector Signal Name Pin # Ground +12V Rotation detection Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 28 SI-60E User Manual SW1: Power On Button LED1: PWR (Green)/ HDD LED (Red) PCIE1, PCIE2, PCIE3: DP Signal from AMD E8860 to IDD100...

  • Page 29: Chapter 3 Bios Setup

    These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could cause the system to become unstable and crash in some cases. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 30 SI-60E User Manual Main Settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit System Language [English] → ←Select Screen ↑↓Select Item System Date [Tue Enter: Select +- Change Opt. 01/20/2009]...
  • Page 31 ► iSmart Controller 3.1 F1:General Help F2:Previous Values ► AMT Configuration F3: Optimized Defaults F4: Save & Exit ► USB Configuration ESC: Exit ► F81846 Super IO Configuration ► F81846 H/W Monitor Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 32 SI-60E User Manual ACPI Settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit → ←Select Screen ACPI Settings ↑↓Select Item Enter: Select +- Change Opt. S3 only (Suspend to …)
  • Page 33 Enable/Disable Security Device. NOTE: Your Computer will reboot during restart in order to change State of the Device. Pending operation Schedule an Operation for the Security Device. NOTE: Your Computer will reboot during restart in order to change State of Security Device. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 34 SI-60E User Manual Wake up event settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit → ←Select Screen ↑↓Select Item Wake on PCIE Wake Event Disabled Enter: Select +- Change Opt.
  • Page 35 +- Change Opt. F1: General Help Hardware Prefetcher Disabled F2: Previous Values F3: Optimized Defaults Adjacent Cache Line Prefetch Disabled F4: Save & Exit EIST Enabled ESC: Exit Turbo Mode Enabled Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 36 SI-60E User Manual Hyper-threading Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled. Active Processor Cores Number of cores to enable in each processor package.
  • Page 37 (2) AHCI Mode. (3) RAID Mode. SATA Controller Speed Indicates the maximum speed the SATA controller can support. Port 0 Enable or Disable SATA Port Hot Plug Designates this port as Hot Pluggable. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 38 SI-60E User Manual Shutdown Temperature Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit → ← Select Screen ↑↓Select Item APCI Shutdown Temperature Disabled Enter: Select +- Change Opt. F1:General Help...
  • Page 39 AMT Configuration OEMFLag Bit 2: Enable/Disable MEBx selection screen. Hide Un-Configure ME Configuration OEMFlag Bit 6: Hide Un-Configure ME without password Confirmation Prompt Un-Configure ME OEMFlag Bit 15: Un-Configure ME without password. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 40 SI-60E User Manual Amt Wait Timer Set timer to wait before sending ASF_GET_BOOT_OPTIONS. Activate Remote Assistance Process Trigger CIRA boot. USB Configure Enable/Disable USB Configure function. PET Progress User can Enable/Disable PET Events progress to receive PET events or not.
  • Page 41 Maximum time the device will take before it properly reports itself to the Host Controller. ‘Auto’ uses default value: for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 42 SI-60E User Manual F81846 Super IO Configuration Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit F81846 Super IO Configuration → ← Select Screen F81846 Super IO Chip F81846 ↑↓Select Item ►...
  • Page 43 The values are read-only values as monitored by the system and show the PC health status. Smart SYS_FAN1/CPU_FAN1 Function This field enables or disables the smart fan feature. Disabled (default) 50 ℃ 60 ℃ 70 ℃ 80 ℃ Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 44 SI-60E User Manual Chipset Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced...
  • Page 45 The control of Extended Synch on SB side of the DMI Link. PCIe-USB Glitch W/A PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG port. Subtractive Decode Enable or disable PCI Express Subtractive Decode. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 46 SI-60E User Manual USB Configuration Main Advanced Chipset Boot Security Save & Exit USB Configuration → ←Select Screen ↑↓Select Item USB Precondition Disabled Enter: Select +- Change Opt. xHCI Mode Auto F1:General Help F2:Previous Values F3: Optimized Defaults F4: Save & Exit...
  • Page 47 ↑↓Select Item Enter: Select Primary Display +- Change Opt. F1:General Help Primary PEG Auto F2:Previous Values Primary PCIE Auto F3: Optimized Defaults F4: Save & Exit Internal Graphics Disabled ESC: Exit Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 48 SI-60E User Manual Primary Display Select which of IGFX/PEG/PCI graphics device should be Primary Display or select SG for switchable Gfx. Primary PEG Select PEG0/PEG1/PEG2/PEG3 Graphics device should be Primary PEG. Primary PCIE Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6PCIE7 Graphics device should be Primary PCIE.
  • Page 49 Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Boot Mode select Select boot mode LEGACY/UEFI Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 50 SI-60E User Manual FIXED BOOT ORDER Priorities Sets the system boot order CSM parameters This section allows you to configure the boot settings. Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit...
  • Page 51 +- Change Opt. Maximum length F1:General Help F2:Previous Values F3: Optimized Defaults F4: Save & Exit Administrator Password ESC: Exit User Password Administrator Password Set Administrator Password User Password Set User Password Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 52 SI-60E User Manual Save & Exit Settings Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Options →...

  • Page 53: Chapter 4 Drivers Installation

    After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the drivers installation. 4.1 Intel Chipset Software Installation Utility 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. 2. Click Intel(R) Chipset Software Installation Utility.
  • Page 54 SI-60E User Manual 3. When the Welcome screen to the Intel® Chipset Device Software appears, click Next to continue. 4. Click Accept to accept the software license agreement and proceed with the installation process.
  • Page 55 5. On the Readme File Information screen, click Install to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 56: Amd Radeon E8860 Graphics Driver

    SI-60E User Manual 4.2 AMD Radeon E8860 Graphics Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click AMD Radeon E8860 Graphics Driver. 2. When the Welcome screen appears, click Next to continue.
  • Page 57 IBASE Technology Inc. 4. Click Install to continue the installation process. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 58 SI-60E User Manual 5. Select Express and the installation location and click Next. 6. Click Accept to accept the End User License Agreement.
  • Page 59 IBASE Technology Inc. 7. Setup complete. Click Finish to restart the computer and for changes to take effect. 8. To reboot the system, click Yes. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 60: Realtek High Definition Audio Driver

    SI-60E User Manual 4.3 Realtek High Definition Audio Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. 2. Click Realtek High Definition Audio Driver.
  • Page 61 3. On the Welcome to the InstallShield Wizard screen, click Yes to proceed with and complete the installation process. 4. The InstallShield Wizard Complete. Click Finish to restart the computer and for changes to take effect. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 62: Intel® I21X Gigabit Network Driver

    SI-60E User Manual 4.4 Intel® I21x Gigabit Network Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. 2. Click Intel® I21x Gigabit Network Driver.
  • Page 63 IBASE Technology Inc. 3. When the Welcome screen appears, click Next. 4. Click Next to to agree with the license agreement. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 64 SI-60E User Manual 5. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue. 6. The wizard is ready to begin installation. Click Install to begin the installation.
  • Page 65 IBASE Technology Inc. 7. When InstallShield Wizard is complete, click Finish. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 66: Intel® Management Engine(Me) Driver

    4.5 Intel® Management Engine(ME) Driver Follow the steps below to install the Intel Management Engine. 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products.and then Intel® Management Engine(ME) Driver. 2. When the Welcome screen for Intel® Management Engine Components, click the...
  • Page 67 IBASE Technology Inc. 3. Click Yes to to agree with the license agreement. 4. When the Setup Progress screen appears, click Next. Then, click Finish when the setup progress has been successfully installed. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 68 SI-60E User Manual...

  • Page 69: Intel® Usb 3.0 Extensible Host Controller Driver

    IBASE Technology Inc. 4.6 Intel® USB 3.0 eXtensible Host Controller Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click Intel® USB 3.0 eXtensible Host Controller Driver. 2. When the Welcome screen to the InstallShield Wizard for Intel® USB 3.0 eXtensible Host Controller Driver, click Next.
  • Page 70 SI-60E User Manual 3. Click Yes to to agree with the license agreement and continue the installation. 4. On the Readme File Information screen, click Next to continue the installation of the Intel® USB 3.0 eXtensible Host Controller Driver.
  • Page 71 IBASE Technology Inc. 5. Setup complete. Click Finish to restart the computer and for changes to take effect. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 72: Realtek Rtl8111G Lan Driver

    SI-60E User Manual 4.7 Realtek RTL8111G LAN Driver 1. Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click Realtek RTL8111G LAN Driver. 2. In the Welcome screen, click Next.
  • Page 73 IBASE Technology Inc. 3. When the Ready to Install the Program screen appears, click Install to continue. 4. When InstallShield Wizard is complete, click Finish. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 74: Idd100 Driver And Utility

    SI-60E User Manual 4.8 IDD100 Driver and Utility 1.Insert the DVD that comes with the board. Click System and then SI-60E Series Products. Click IDD100 Driver and Utility. 2. Click CP210x Installer...
  • Page 75 IBASE Technology Inc. 3. In the Welcome screen, click Next. 4. When the License Agreement the Program screen appears, click I accept this agreement and Next. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 76 SI-60E User Manual 5.When complete the Installation of the CP210x USB to UART Bridge Driver, click Finish. 6.Click SI-60E Installer.
  • Page 77 IBASE Technology Inc. 7. In the Welcome screen, click Next. 8. When the Destination Folder screen appears, click Next. Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 78 SI-60E User Manual 9. When the Ready to Install the Program screen appears, click Install. 10.When InstallShield Wizard Complete, click Finish.

  • Page 79: Appendix

    Support 60Hz/120Hz Modes Support Multi-Box ID Support Multi-Box Device Setting 10. Support H and V Bezel Adjustment 11. H Blanking Setting 12. V Blanking Setting 13. Apply Key 14. Program On/Off Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 80 SI-60E User Manual Display Mode Table Stretch (1x2) Stretch (1x4) Stretch (2x2) Clone 3840x1200 7680x1200 3840x2400 1920x1200 3840x1080 7680x1080 3840x2160 1920x1080 3360x1050 6720x1050 3360x2100 1680x1050 3200x1200 6400x1200 3200x2400 1600x1200 3200x0900 6400x0900 3200x1800 1600x0900 2880x1050 5760x1050 2880x2160 1440x1050 2880x0900 5760x0900 2880x1800...
  • Page 81 Step 5: Go to UP or DOWN Port select a Display Resolution Step 6: Go to Display Driver Control Page Step 7: Setting the two Monitor to V Combine Condition Step 8: Adjustment H Bezel Value Step 9: Adjustment V Bezel Value Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 82: I/O Port Address Map

    SI-60E User Manual B. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address...

  • Page 83: Interrupt Request Lines (Irq)

    Intel(R) 8 Series/C220 Series SATA AHCI Controller - 8C02 IRQ 19 Intel(R) Active Management Technology - SOL (COM3) IRQ 22 High Definition Audio Controller IRQ 23 Intel(R) 8 Series/C220 Series USB EHCI #1 - 8C26 Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

  • Page 84: Watchdog Timer Configuration

    SI-60E User Manual D. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock.
  • Page 85 Set_F81846_Reg(0xF6, interval); //set timer bBuf = Get_F81846_Reg(0xFA); bBuf |= 0x01; Set_F81846_Reg(0xFA, bBuf); //enable WDTO output bBuf = Get_F81846_Reg(0xF5); bBuf |= 0x20; Set_F81846_Reg(0xF5, bBuf); //start counting //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81846_LD(0x07); Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 86 SI-60E User Manual //switch to logic device 7 bBuf = Get_F81846_Reg(0xFA); bBuf &= ~0x01; Set_F81846_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81846_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81846_Reg(0xF5, bBuf); //disable WDT //---------------------------------------------------------------------------...
  • Page 87 (ucDid == 0x07) //Fintek 81866 goto Init_Finish; F81846_BASE = 0x00; result = F81846_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81846 (void) outportb(F81846_INDEX_PORT, F81846_UNLOCK); outportb(F81846_INDEX_PORT, F81846_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81846 (void) outportb(F81846_INDEX_PORT, F81846_LOCK); Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
  • Page 88 SI-60E User Manual //--------------------------------------------------------------------------- void Set_F81846_LD( unsigned char LD) Unlock_F81846(); outportb(F81846_INDEX_PORT, F81846_REG_LD); outportb(F81846_DATA_PORT, LD); Lock_F81846(); //--------------------------------------------------------------------------- void Set_F81846_Reg( unsigned char REG, unsigned char DATA) Unlock_F81846(); outportb(F81846_INDEX_PORT, REG); outportb(F81846_DATA_PORT, DATA); Lock_F81846(); //--------------------------------------------------------------------------- unsigned char Get_F81846_Reg(unsigned char REG) unsigned char Result; Unlock_F81846();...
  • Page 89 F81846_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81846_UNLOCK 0x87 #define F81846_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81846(void); void Set_F81846_LD( unsigned char); void Set_F81846_Reg( unsigned char, unsigned char); unsigned char Get_F81846_Reg( unsigned char); //--------------------------------------------------------------------------- #endif //__F81846_H Copyright © 2013 IBASE Technology Inc. All Rights Reserved.

Table of Contents